full lt1 exhaust, 3rd gen parts, etc.

[camar0corey]

Thread updated, pictures, items.

Need this stuff gone, if you need something please make a offer!

Corbeau seat bracket, part number 22012 77-83 Corvette, $75 obo.

Driver side Firebird fender, 91, $35.



Firebird hood, 91, $30.


Camaro hood, 92, $20

Stock 94 Z28 sway bars, I have two rear factory bars laying around, no endlinks. $5.

Trans Am glovebox, out of 91 firebird, $10.


92 RS tail lights, driver side tag light has a hole in the lens, passenger side has a small crack, $25.




Another 3rd gen Camaro tail light, earlier style, small crack in corner, driver side, $10.

[camar0corey]

Continued

Rear seat belts, 94 z28, $40


92 Camaro RS ground effect, driver side, no cracks, all mounting tabs, $10.



92 Camaro RS ground effect, passenger side, rear is cracked, some damaged/missing mounting tabs, $5.



*All ground effects will need prep and paint.*

91 Firebird headlight assembly, no damage, motor doesn't work, $5.


92 Camaro door plastic, both sides, this is the handle area stuff, $5.


92 Camaro lighter panel, $5.


Stock 83 Z28 shifter, $20.

Stock T56 shifter, $40.

Stock 94 Z28 air box, with K&N filter, $15.

94 driveshaft, $50.

94 Camaro tail lights, $75 or trade for a good pair of 97+ tail lights. My 97+ tail lights have taken damage so I guess if anyone wants to trade the 93-96s that will work also.

Jet LT1 fan switch, $30. Never used, new they are $60. Now on Ebay. SOLD Damn it went for $5?

Mezerie electric LT1 waterpump, $200. Its already in a waterpump housing. Mileage unknown, it came on my Mom's daily driver. She wanted a mechanical pump. Pump worked great, just not what is needed on my Mom's car.


Third gen Camaro lightweight hood. This is the factory 82-83 hood! Getting hard to find these I imagine. Extremely light and comes with NEW GM hood hinges! Does need some work, but is completely intact and strong in the hinge and latch areas.



Prices do not include shipping. If you want any of this stuff we will figure out actual shipping. Pickup still available at just about any time.

My prices are still way cheaper than ebay or third gen part sites.........
Can deliver for gas funds also.
I'm in Spring Hill, about a hour/45 min. North of Tampa, hour and a half west of the edge of Orlando. PM or call 352-232-2888.
Thanks for looking! -Corey

[92slowmaro]

do you have the quick ratio steering box with little to no play?

-thanks,
ryan

[camar0corey]

Hmm would the RS have come with it? Not sure on how it is condition wise, as I never drove the vehicle I'm parting out. If its got a certain part number on it, let me know and I'll go look.

[Jaysz28]

V6 cars didn't come with the quick ration steering box... Unless it has the F41 suspension package. that'll be on the rpo code

btw, you might want to pull that T5 setup. There are a couple of 'want to buy' posts on TGO in the parts wanted section.

wish there was something else I could use off of either car

-jason

[camar0corey]

Thanks for the heads up, I checked over on TGO, most were looking for a v8 setup, I think only the bellhousing is different though.

No one needs some good 3rd gen metal though? I had two 3rd gens back in the day and neither had perfect metal, you all must be lucky.

[92slowmaro]

hey i need something i just remember this... do you have the heater core hard lines? they are 2 metal lines that run on the passenger frame rail from the radiator to the heater core. let me know!!!!

[MEAN LT1]

I'll take that spoiler from you. Let me know when a good time to pick it up?.

[camar0corey]

On up! I'll have the exhaust pulled by Sunday, if anyone is interested yet.
Looks like the Camaro passenger side front fender has found a new home, probably.

[camar0corey]

List updated, some prices lowered. Still unemployed so I can still deliver for some gas funds.
Shipped a fender today, UPS is skilled enough where I am at to ship them for $50, not the $150 they want on ebay to ship one. (Its really close,package size wise, so I can see why they do ask that). Driver side fenders left, passengers from both cars gone.

Added seats, took the covers off them that were on there, surprise, unmolested seats!
Manual cloth seats, good shape.

[wmskateteam]

any chance of the 91-92 ground effects, specifically front spoiler?

[camar0corey]

Front spoiler is toast.

I have the passenger side rocker off, its cracked in the back but I think it can be fixed, I might pull the driver side off today to see how that looks. Trying to get the driver seat out of the bird at the moment.

You are about the 5th person to ask about the front spoiler, must be a popular thing to get damaged. Unfortunately the front spoiler and bumper are both beyond repair.

[acttofdepression]

hey man u got any of those firebird parts left? i live right down the road from you and i just bought my brothers 92 firebird. i need the driverside fender and the driver side seat belt retainer and the hood. odds and ends im trying to make this thing look decent before i drop an ls1 in it. if u still got them parts let me get a number and day to come see if you do.

[Choppers]

pics of the lt1 exhaust to Choppers2019@yahoo.com

[camar0corey]

Inquires replied to. Thanks!

[camar0corey]

Thread updated.

Any chance the thread title can be changed? If so could it be

Seats, thirdgen parts, BBK, misc.

Thanks -Corey

[4u 2 nv]

where are you located?

[camar0corey]

Spring Hill, hour North of Tampa.

Edited my post up top to reflect. I always see the location failed to be listed in ads, you think it would click to put that in.

[twitchtwice]

somewhat interested in the 700r4, will that bolt up to a 400 SB in a 69 camaro?

[camar0corey]

Not to my knowledge. I guess due to block size its a V6 bolt pattern. So far as I know it will only work with V6s.