2001 Corvette Z06 14K miles - Lowered on factory bolts- P&P TB - Vararam - Nitto 555R DRs
2001 T/A M6 H/C/I/E SOLD http://www.ls1tech.com/forums/image....ine=1206147219 "From time to time, the tree of Liberty must be refreshed with the blood of Patriots and Tyrants..."
That is the New TVS supercharger, the same 2.3L unit that is being used on the ZR1. So I wonder if this is the beginning of what is to come for the LS9?
And for some reason that just doesn't look like an LSX block...Maybe because it is not ORANGE!?!?! That really looks like an aluminum block, weird?
That is the New TVS supercharger, the same 2.3L unit that is being used on the ZR1. So I wonder if this is the beginning of what is to come for the LS9?
And for some reason that just doesn't look like an LSX block...Maybe because it is not ORANGE!?!?! That really looks like an aluminum block, weird?
theres a few threads of the orange color peeling off as it just painted, even in the coolant passages. maybe this guy took an extra step and stripped the whole block of that paint
Any one know the song in the beginning of the vid??
__________________ 01 ZO6 - Built 346ci H/C STS TT 559rwhp 530rwtq 9psi 701rwhp 669rwtq 16psi(Old Setup)
New setup Hinson Front mount T76.
Shooting for 9.99@140+mph 800rwhp on the kill mode
That is the New TVS supercharger, the same 2.3L unit that is being used on the ZR1. So I wonder if this is the beginning of what is to come for the LS9?
I'd like to have 950 hp , it's a 434 cid, I'd love to have one for my street car, 850+tq at only 2,500 rpm, you can run stock stall and gears with that rpm range
The Magnacharger place and Duttiweler are both close to my house, I've seen a lot of cool stuff come out of Duttweiler's shop, if he puts his name on something you can bet it's going to perform.
He's a cool guy, gave me some free stuff for my 1st race car, too bad about Germanson he was a cool guy I met him at his chassis dyno shop in Oxnard, he just died
__________________ Black 1998 Camaro Z28 Currently under construction tin can with 4 wheels
Email:CHRISTOPHERMORALES@HOTMAIL.COM www.fquick.com/RAGEN98Z28
Thats the whole point, some of the screw guys are using bigger blowers to make this same power...
The TVS still is an air mover, not a compressor like a Whipple or KB. It's advanced in design but can't hit the efficiencies of an internal compression screw unit. Check the maps at Eaton.com.
Jim
__________________ Don't bring a knife to a gunfight.
Half-Assed = Half Fast.
The TVS still is an air mover, not a compressor like a Whipple or KB. It's advanced in design but can't hit the efficiencies of an internal compression screw unit. Check the maps at Eaton.com.
New Vid of Magna 2300 on LSX 950HP!!! 
, it's a 434 cid, I'd love to have one for my street car, 850+tq at only 2,500 rpm, you can run stock stall and gears with that rpm range 
