#21 TECH Enthusiast
Join Date: Sep 2006
Location: Flint, MI
Posts: 685
FTP 85mm. Rubs a little bit but its a nice piece.
__________________
Andrew
'02 SS Pewter Vert M6 #3047
My Fquick
#22 Registered User
2000 Pontiac Trans Am
Join Date: Jul 2009
Location: Arkansas
Posts: 26
Guess the majority rules then.. SLP it is!!
__________________2000 Trans Am WS6, SLP cat-back, SLP lid, SLP air scoop, K&N filter, Custom Dyno Tune [/b]Charcoal Ram-Air stripes, front bird overlay, trans am overlays, Torq Thrust II's, dual/dual tips, smoked tails and side markers, JVC double-din
#23 11 Second Club
2000 Chevrolet Camaro
Join Date: Apr 2006
Location: Liberty,NC
Posts: 525
FTP 85mm fits fine does rub a little tho
__________________
1/8 mile 1.78 60' 7.523 96.86mph
3620lb with 3/4 tank and me
2000 SS,NBM,6.0 LS2,463hp 420tq Williams Performance
06 GTO all stock
89 S10 broke 4cly
86 silverado
#24 On The Tree
Join Date: Dec 2008
Location: southeast
Posts: 105
I have the SLP also but I can never get the right most front corner to seal all the way.But I like the looks.
#25 TECH Regular
2001 Pontiac Trans Am
Join Date: Jun 2008
Location: Naperville, Ill
Posts: 447
Quote:
Originally Posted by
slickone I have the SLP also but I can never get the right most front corner to seal all the way.But I like the looks.
Nobody does. Don't feel bad. Still my vote goes to SLP (for once).
__________________
2001
Arctic White Trans Am WS6 M6. DOM: July 26, 2000. ASC#206: 26k miles.
#26 TECH Fanatic
Join Date: Oct 2008
Location: VA
Posts: 1,086
my mti (black) fits perfectly. looks stock. i didnt install it - the first owner did - but im sure it wasnt hard.
__________________M6 T/A with lid, slp lm1, corsa clones, sequential signals, and some stickers and paint
#27 TECH Senior Member
Join Date: Jul 2003
Location: HOT 'LANA, GAWJA
Posts: 6,268
Outside of cosmetics a lid is a lid is a lid ...
__________________
Y2K NBM 6 MT Z28 CP
DYNO TUNED BY RON & MIKE @ GMMG
THEY ARE NOW VENGEANCE RACING & DEVELOPMENT
HP/TQ ? IT'S STOCK THEY ALL SOUND LIKE THAT
POWER TOUR 04, 05, 06, 07, 08, & 09 ... YEAH I'M GOING IN 2010 TOO
#28 Banned
Join Date: Mar 2009
Posts: 68
Slp! Is the best!
#29 Staging Lane
Join Date: Mar 2009
Posts: 88
anybody have the clear MTI lid??
__________________SLP lid, lS6 intake, ported Tb,Hooker LT w/ORY, hooker exhaust, 160 stat,dyno tune, BMR strut brace, LCA, Adj. tor. arm, panhard bar, springs, rear and front sway bars. TT2 wheels and adding.......
#30 TECH Addict
Join Date: Mar 2005
Posts: 2,533
had a few lids but at the end got the Volant CAI...dont think is superior or anything but the visual impact is hard to beat...
__________________
February 2010 GMHTP Street Heat Section Car
"When I die, I want to go peacefully like my Grandfather did, in his sleep -- not screaming, like the passengers in his car"
"I swear to drunk I'm not God occifer..."
#31 Teching In
Join Date: May 2009
Posts: 37
I just installed one of SLP's new lids on my car last week and it is awesome. Some complained about the older SLP lid having fitment issues, but from what I read they changed the manufacturing process recently. Mine fits awesome, looks good, and was pretty easy to install. I definitely recommend using a hair dryer when it comes time to fit the MAF to it.
#32 11 Second Club
2001 Pontiac Trans Am My Garage
Join Date: Jan 2003
Location: Asheboro, NC
Posts: 2,265
Get the SLP lid like everyone else has.
#33 Moderator
Join Date: Aug 2004
Location: Southeastern IL
Posts: 5,556,412
Quote:
Originally Posted by
Circa307 anybody have the clear MTI lid??
Yep. White Z28, white leather, white paper filter.
A lid is a lid. They are all the same.
__________________
Overlap = {[(Intake duration + Exhaust duration)/4] - LSA} * 2 White/White Leather '99 Z28 M6; Complete LS6 Engine; PP 225/229 Cam; LS7 Clutch with Tick Master Cylinder at Exotic Performance Plus!
#34 11 Second Club
1999 Chevrolet Camaro My Garage
Join Date: Apr 2008
Location: Bandimere, CO
Posts: 1,477
MTI Clear Lid, Fast Toys 102mm Lid, MTI Carbon Fiber Lid, Slp All those I like.
__________________
Blacknite Forged 347 | Vortech YSI Supercharger | PRC LS6 Heads | Comp Cams Custom Grind Camshaft | LS6 Intake | Harris Speed Works 100 Shot Plate Kit | QTP Headers & Dual Electric Cut-Out Y-Pipe | Hooker Catback | Strange 12 Bolt 4.10's | Sold 2000 Pontiac Trans Am WS6 | 1995 Chevrolet Camaro Z28 |www.fquick.com/99Ls1fever
#35 TECH Senior Member
Join Date: Aug 2007
Location: Yo Momma's House, and Louisiana
Posts: 6,454
Quote:
Originally Posted by
somws6bird A lid is a lid, any aftermarket lid will be almost identical. SLP gets my vote though
me too
__________________
01 SS Rally Red A4 #4987
#36 TECH Regular
Join Date: Nov 2007
Location: SO. Cali /Redlands/ Victorville
Posts: 464
ftp 104mm lid on the way...with tsp 100mm MAF
__________________
CURRENT VEHICLES. 2002 GMC
2500HD SLT 8.1 CCSB
| 2001 Trans AM
WS6 M6
| 1999
Camaro SS clone M5
| 1997
Camaro Z28 A4
www.myspace.com/alphal3al
#37 On The Tree
Join Date: Jan 2007
Location: New Braunfels/Mission, TX
Posts: 134
I just put in my MTI clear lid. MAF went in there no problem. Although it does rub on the black piece underneath the MAF area.... is it alright like that?
#38 TECH Junkie
Join Date: Jun 2004
Location: Murrieta, CA
Posts: 3,087
Quote:
Originally Posted by
chaman had a few lids but at the end got the Volant CAI...dont think is superior or anything but the visual impact is hard to beat...
I've got that as well... I won't say it's superior HP/TQ wise... but throttle response is MUCH MUCH better with the volant. Too bad it fits like shit outa the box but... in the end I got mine nice...
if I were to go with a lid again, I'd go with the FTRA on... it's the best performing one on the market right now. And the one's I've seen in person seem to fit and look very very nice...
Last edited by Soul TKR; 08-07-2009 at 02:12 PM ..
#39 Teching In
Join Date: Sep 2007
Posts: 10
Quote:
Originally Posted by
Pharcyde50 I have the fast toys 85mm lid and it fits great.
i have the slp too...but i did just order the fast toys 85 mm...we'll see what happens i guess
__________________
Custom grind cam...ls6 intake manifold..Pacesetter Lt's...Loudmouth exhaust..UD pulley..bolt ons...ls7 clutch...Fast Toys 85mm TB/MAF/Lid...more to come.
#40 Teching In
Join Date: Apr 2009
Posts: 13
Hey guys, is it worth getting the whole SLP cold air package like the following link? Is it worth the 300 bucks, or just get the lid and rock a cheap paper filter?
http://www.byunspeed.com/product_inf...roducts_id=663
__________________Mods = Borla Cat Back Exhaust, Berk HFC's, Stillen Gen 3 CAI, Cobb AccessPort Custom Tune Mods = Stock For Now
Tags 01 , 2001 , 53 , air , fast , fitment , install , issues , lid , ls1 , ls1tech , silverado , slp , toys , trans , upd , ws6 , z28
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
01 SS Rally Red A4 #4987 
