- Stock internal M6-11.72@116.59
- New Summer Best!
- 26x10 ET DRAGS on an 8" Draglite rim...will it work?
- Harlan 2-step installed today!
- speedshifting?
- 15" vs 16" draglites
- LS1 Motor Plate almost finished...
- Cant race my SS anymore
- Some summer time passes and a new best mph
- !rear swaybar? good mod?
- what'll my NEW mods run> mti stage 2.......
- Got that 10 sec pass finally!! Video!!
- My first time at the track
- My first shake down run on my new setup.. I am rusty..
- Where can I get a trans temp. gage?
- ET Street vs ET Drag (or any other similar comparison)
- New best 1/8 mile time with my small cam combo
- Drag Racing on a Plugged Nitto
- Whats the best slick available?
- I raced the tow truck today!
- New best with Hotcam+TNT!!!!
- Ford 9" center section weights for ya
- 2003 Cobra at Bristol Dragway
- Best drag only little mufflers?
- paging 9ball....
- Lets talk torque arms.. Need suggestions.
- A night at the track
- need sealed battery box to fit in spare tire well...
- Bogart wheel/tires mounted ..pics inside!!
- What's the biggest tire I can run on a 15x10 Convo Pro?
- ST3500 kicked butt at the track tonite
- Got some shakedown testing done tonight...
- Anyone with BMR Kmember and A-Arms please help
- Louisiana Viper/Vette Shootout! Come out and play!
- Optima battery
- 15x10 Convo pros-Spacer,grinding?
- What angle should I set my BMR tq arm at?
- Short Belt
- thoughts on this setup...
- Paging Terry Berger
- What Gain With Welds ?
- Today's progress report
- Who has run 11's Stock Internal with no weight reduction?
- VIDEO of my 3598lbs T/A
- The BEAST is coming along! :-)
- World's Slowest 2002 Z06??? IAT Sensor to blame?
- Tire pressure for ET Streets
- Tbyrne's Camaro???
- Colonel cant hang
- No track time yet, but I'm still hopeful
- How much does the high temps and hi hum. effect the 1/4?
- DoO you think the following will offset any weight gain?
- The "Hot Rod" meets Madman.
- Adjustable Drag Shocks for a 3rd gen...
- Mac Headers with o/p OR 4.10's with Flomaster Exhaust?
- 60ft question....
- A few pics of the new motor install
- New motor is installed, but I still have alot of work to do!
- Any tips on how to launch A4 SS? 60 ft. Sucks
- Guys with line locks in here please!!
- Anyone with Centerline Wheels Warrior Rim?
- 9" or 12 bolt and why....
- Hard launch on sticky tires=KABOOM! for the A4
- racing a gsxr600
- Which car would win?
- Will I have to grind calipers with these 15's?
- My new Wolfe roll bar (Pics)
- Paging GeorgeC
- coil overs for drag racing
- New Best @ Carlsbad
- Blew out a Slick at the top end of the track.
- in the summer heat, what kind of DA are you guys seeing?
- 01 GT vs me in the 00Z28
- overdrive vs. drive?
- Not another 127mph heads/cam car?
- i got the new time at the track
- This is what I done to the Spohn Torque Arm!
- The "Other Car" is King of the Mountain!!!!
- NEW N/A PERSONAL BEST WITH MY CARTEK 415
- what gears should I run in a 9"
- Got into the 12s Today!
- Left lane or Right lane?
- 11.88 in the Heat!
- Weighed the Stock Torque Arm and Spohn Torque Arm.
- Harlan 2-Step is the SH!T
- 3.73 vs 4.10 for street/strip combination
- DA and E.T. (kinda long)
- Harlan two step install question?
- Meziere Water Pump let's figure it out
- New Best!!!
- Killer times and MPH
- New lightweight G2 rear suspension components for you hardcore racers!
- Stumped!
- Has anyone run a 315/40/17 BF Drag radial on a 9" rim?
- Will this stuff ad up?
- 3.73's vs. 4.10 on the street from 30-120, whats the bottom line best ratio?
- My LCA's dont seem even to the ground after the 12 bolt install, is this normal?
- tiny improvement to my best.
- Got new Times tonight
- NEED EST. 1/4 MILE TIME
- Pictures of Hoosier QTP 27-11.50x15's on my lowered SS
- Best 12-bolt and where to buy it at the cheapest price?
- Top 25 Fastest Stock Block 4th Gen F-Bodies
- For those of you wanting to work on your reaction time.......
- Finally made it to the track.
- I'm almost back!
- Anyone Go to Union Grove Dragaway?
- Would there be interest in LS1Tech track dates?
- F-body & Corvette Southern Shootout!
- New tire question.
- Will the Cannibal ever lose any weight?
- Z06 1/8 times?
- 28" tire on Convo 15-7.5 (5" bs). How wide for tire?
- Not an LS1 question, but need some opinions on what size slicks to run??
- Two different types of street skinnies.....which would you buy?
- Tell me about this treating the slicks trick........
- i need combo opinions
- what cutout for the track?
- What lightweight front rims can i drive on the street?
- M/T 28 x 11.5 ET DRAG - any chance in hell of fitting?
- Anyone know where Scott Jantzer is hiding?
- 13.57... is this right?
- Hoosiers SUCK!
- I'm Back!
- remove borla and do x pipe/bullets/before axle?
- A good day and a bad day at the races... Global West track link looks like pretzel!!!
- Coach & Thunder Racing get another WIN!
- New Best
- Trailer Pics!
- New Track Times
- Anybody who has raced at Bristol dragway,come inside.
- !ABS? How to?
- Hoosier QTP pressure??
- average pickup in mph with a Stage 2 H/C package
- Density Altitude (DA)
- Do I need to balance my Slicks?
- Learning to launch...guidance please.
- Does someone make Roll Cage that can be quickly removed & replaced?
- What does it take to break an Eaton?
- New Best...and yes...rear took a dump. How many passes did I get out of the rear?
- H & C car: How much loss from short shifting at the track?
- Drag tire/rim set up for C5 Vette???
- Roll cage arrived today!
- New "Hoosiers" 28x10x15
- who runs tubes with their ET streets/drags?
- Sunday at Houston Raceway Park
- Check this video out ....
- Can I run a spacer safely w/extended axle studs???
- Who's running this tire combo?
- 60' question.
- My first Drag! Opinions please...
- H/C shakedown runs: your thoughts please
- 1st time to track in 11 months (later this week)...
- Open ORY for the strip?
- Calling out Southern LS1's. Eunice Louisiana Aug 3rd
- Not happy with new track times with new mods
- Not on Drag radials
- taking out air bags help please
- Safe to remove heat shielding?
- Check out my video from this weekend :)
- Help Quick!! Best Tire Pressure For The Track (F1's)
- Post your summertime heat "et's, mph&60ft"
- What should my 60' times drop with Nitto's?
- Please post your best wheelz up pic!
- Race results for the weekend of July 13 & 14
- Why am I losing trap speed with each run?
- ET Fronts
- Quick help: Best first mods for 12s
- A lot of BS times in sigs these days?
- ATTENTION: GMHTP Looking For LS1 F-Body Feature Cars In NC, VA, & SC
- Harlan's Two Step works as advertised!!!
- 2003 cobra quarter mile times
- Altitude finder website
- This truck could have taken me out! (vid)
- New track times!
- How much ET reduction do you guys see with hotter weather?
- New Times with stage 2 heads and 227 cam... p.s..Rear didn't break either
- What trap speeds are you intake/headers A4 cars running?
- front bumper support need help ASAP
- Has anyone had tires that have been...
- Does anyone have pics of grinded calipers to fit 15x10 prostars???
- Do you need relocation brackets if....
- What should i be running
- What do you think about a 9inch slick?
- Should I race the Z28 or the truck?
- Harlan two step question
- 01 LS1 in 91 Z28: TRACK TIMES!!
- First pass on ET Streets
- Wisconsin bound
- Drag racing info needed---->HELP!!!
- What psi for even wear on 275/40 Nittos??
- go away rain!!
- Upstate NYers Please race me to quell the interest of many LS1ers
- Harlan Two Step device, anyone have one.
- 1/8 th mile times
- What should I be running in the 1/8????
- 5pt. harnesses
- pic of 15x10 pro stars w/ et streets
- How much can hot weather affect your times?
- Help out of weight reduction!
- VIDEO CARTEK c5 10.72@130
- Bumper Supports
- oredering skiinnies, some ?s
- From 10.9 to 9.9, how much more HP needed?
- I need a rollbar, but don't want one
- Exhaust recommendations
- crazy
- how to reduce a Z28 weight to under 3000 lb?
- First time using the TNT F-1 wet kit
- Z's stock #'s
- Crappy weather but new best. Video inside.
- What do you think? 30'tall tire and 5.13 gears
- Weekend Race Results
- So close but yet so far!
- need info on F-body nationals in Sept in ILLinois.
- Gearing (M6) and 1/8 mile times
- M6 Guys With 4.10's Inside Please
- Need advice for slicks
- Should I get 4.11's?
- best launching RPM?
- Finished my drag brake install
- 10.71 @ 130 mph - All Motor Corvette (Cartek)
- Why did the Mickey Thompsons Hurt my 60ft??
- 1/4 mile video
- Finally ordered a trailer!
- Torque converter recomendation
- It's 95 degrees and 90% humidity but I'm going to Midnight Madness anyway.
- When is nitto coming out with their slick?
- First time racing...
- Almost 10's on drag radials with first outing in Project SS
- Mike R. {AKA Stealth} "CARTEK 415CI" runs 10.71@130!!!
- I finally broke into the 12's
- new best again. still slow but making progress.
- Started installing front drag brakes...
- 4th of July Race Results
- i lost 6 mph!my et down 2 tens! help.
- What to get first?
- Whatever happened to Tom the Roofer?
- Is a right rear airbag and /or hals really nessisary?
- 5 point harness that is LEGAL to daily drive with...
- WHat times am i possible of running?
- What are the lightest Tires out there
- paging Raughammer : what did you do to reduce the weight of your Z28?
- 26" or 28" et streets for daily driver?
- Big Money Payout this weekend at TAD
- Bigger tire/Prostars/HAL's.....
- Is any one using this SLP Line Lock?
- fireball and others inside here.
- need help, will 28x 10 fit ?
- How do you do a Burnout w/ M6?