- Paging project DRAGULA (PSJ)...Friday was good weather!
- New times w/converter/gear/tuning on stock A4
- New to the board!
- Shift light question
- pics of 10" pro star rears ON car/ stick out? get 8"?
- backspacing for pro star 8" rears?
- just tried et streets! TORQUE management!!!
- what rpm should i leave at with the SY3500
- Bolt on record a bit lower and faster: 11.273 at 120.02!
- 2 new p.b's in one day 10.89 n/a &9.94 n20
- TRACK TIMES ON NITTO'S
- some new times w/ cam and converter
- Gearing/Tire size question....
- Convo Pro rear rim size????
- Parts list to replace steering wheel?
- Awesome drag conditions again-will it hook though?
- 11.0......grrrrr!
- Ikeep hitting the rev limiter almost every other run,why???
- 12.37 @111.93 on bolt ons :) M6 stock internal
- Launching with Torque Converter?
- I'm almost quicker than a 421ci iron block motor!!!
- Stock radials in front-ET streets in back-is this OK?
- weld 15x10 pro star/ tire hit fender on hard acel?
- Naked Girls, NAKED GIRLS.............
- madmans lca's
- New best
- Paging Trevor D....
- 9s on the stock short block?
- pro star 3 1/2" skinnies ok daily driver?
- Line Lock Install - Brake Bleeding Question?
- New Slicks
- Shake down run at Cecil
- New additions to cage.
- From Nitto's to Mickey Thompson's Slicks
- Northwest Racers inside.
- question for fast M6's...
- Anyone Have Pics (or Advice) on Grinding FRONT Calipers?
- Mark (C5-PIG) runs 11.07@125.6 with our Stage 2-X H/C
- 500 miles enough for 1st 1/4 blasts?
- Cars with 15x10s, 6.5" backspacing
- Small update on the transformation of 1BADTA
- Whats the best way.....
- my quest for 10's n/a ..........continues
- Paging JS
- What backspacing do I need on a 15" weld wheel so they won't stick out of fender???
- New best!
- Grinded My Calipers - Need Some Help!
- anyone with Alston roll cage?
- Average LS1tech times
- A video a buddy of mine put together of my car at the track.
- Prostar 15 x 3 1/2 w/ kelly 165 /15 metric 600 weight
- Paging the lift off hood guys
- Anyone use the Performance Trends Drag Sim?
- Serious HP question---->
- What do you think I should shoot for ET/mph wise?
- How much does the Juk padding weigh?
- How much will lightweight carpet save me if I use my stock sound deadener?
- Question about FTRA.. Should I block the front intake? or is more better?turbulance?
- My LS1 Monte SS was knocking on 12's :>(
- Stuck in the 11.30s!
- Change some stuff on Dragula; need help on rear QA1/Hal
- Rear bar: wolfe, BMR, bigger stock style?
- Hotcam+TNT=11.68 @120.53
- Front runners w/ nittos in the rear?
- finally 12's
- Wheelie bars
- Tire and wheel combo?
- Maximus chipping away
- Finally weighed the car
- First time at the track with my Z........
- rear seat removers......need your help.
- Kickin my butt!
- Cash Awards from LG Motorsports for the G5 cam users
- Who tried a gutted intake manifold?
- POLL: Lexan/Plexi replacement glass for weight reduction
- Post your best 60' on radials
- what rpm should I launch at with a ST3500?
- HELP! 13.90 et with g tech LOOK!
- Paging Harlan
- Styrofoam in front end?
- ProStar vs. Draglite weight difference
- Has anyone proven the unsprung weight theory?
- Car runnig like shite!!!...
- Aluminum fasteners?
- How many cars in the 10's with stock rear and a M6
- subframe connectors/worth it????
- removed airbags! did I get it all to sell?
- Who makes light wieght, pin on hoods?
- How do I remove the airbags??
- Anyone figure out a Air Bag swtich?
- NFRA needs your help regarding turbo sizes
- What is "Driving Through the Converter"?
- removing bumper supports TONIGHT help! will it sag?
- Videos of mike's 10.84 and brent's 11.20 runs at ATCO.
- When does Moroso kick you off the track?
- New Wolfe cage pics?
- ST3800 vs. ST4000 vs. PT4400
- Anyone drive on REAL drag fronts????
- Going to bigger stall?
- how about these summit seats
- I need some lightweight seats..
- Best roll cage?
- Lose weight or gain power?
- Lightweight carpet?
- how to remove bumper supports?
- Anybody getting a M6 to hold up for racing?
- LS1 wheels up club...
- Anyone weigh a 165/80/15 tire???
- race weight is 3360
- Front Suspension Travel Limiters - Anyone Using?
- Paging JS
- 11.14 @ 119.77 at West Coast Shootout
- summit battery in trunk mount kit>>>
- How much will these mods improve my 60ft?
- how to lower raceweight? colonel???
- ET improvement with 3.73s
- for those who have removed the sound deadening
- Does anyone know of any light weight rims?
- West Coast Shootout Results
- Lexan glass
- Few videos from last night >>>
- Questions for the track.
- Bone stock Z28: ET Time?
- Race gas sediments out? Help me out!!!!
- Back from the track
- BFG dr's not hooking on street??
- 9-11 sec. guys using what rear swaybar?
- Super Hardcore weight reduction!
- Anyone running these skinnys?
- et streets poll TUBE or NO TUBE? 16" rims
- new best, but mph WAY off. weather effect that much?
- Stock 02 Formula vs Stock 02 WS6-who wins?
- anyone running wolfe swaybar?pics?
- et streets need bolted to rim? beadlock?
- Stock crank pully weight?
- gain from nittos
- Aluminum spacers--Rebound snubbers
- NFRA Footage online! Link w/n!
- Coming Soon "UCC"
- Changing Out To Longer Front Wheel Studs
- A little better.. 11.15
- Nitrous on H/C car?
- Anyone do a nice !back seat setup...
- What are important pillar gauges to get for H/C car???
- Project 4.56/28X9 complete---->
- racing with skinnies
- Adjustment on Hal shocks for the track ?
- Et Street psi?
- nitto dr's or bfgoodrich dr which is better???
- Looking for a 10 sec car street fbody.
- will the YTP4400 out 60 a vig3600??
- anyone use wolfe rear swaybar? hard to install PICS?
- Two thumbs up for MMS
- Meziere Electric H20 is In!
- More pics...
- Paging Terry Burger
- Slow Formula?
- Anyone with a Vig 3200 running 10's-low 11's?
- Weight reduction list for the daily driver...
- anybody hit 11.9et with only these mods...............
- Finally 12's
- Burnout for ET drags? and PSI
- How to lower car and get decent 60 ft . times
- Paging Terrible Terry Burger---->?
- All 10 sec head-cam & bolt on cars:
- Removing the inner-door bars?
- Please explain ET and MPH
- Me vs. 10 sec Bug- video inside
- PAGING Bob Cosby---->
- 15x3.5 Weld Skinnies - Need Longer Studs On Front?
- M6 launch pic...
- Vette/Viper/F-Body Shootout at MIR May 4th 2002
- 3000GT SL or 3000GT VR-4
- 7000 rpms + 28/10/15 Hooser + 'verter slippage = what mph?
- I have a question...
- May 11, 2002 Cecil County Raceway. F-Body Shootout!! This Saturday!!
- Wondering if ?????...
- Rules at Kennedale
- GM West Coast Shootout!
- Need Opinions: Widest Tire On A Rear Convo Pro?
- Suspension upgrades?
- Thunder Racing Shootout Suggestions...
- NFRA Event on Popular Hotrodding TV
- Thinking of buying 275/50r16 Hoosier Drags for stock 02 SS
- 7.62@90.14 1/8mi>>>Stock Internal a4 guys come inside.
- F-Bodies Unlimited Event draws big numbers!
- Can't get M6 to hook-up at track
- 1/4 Times!
- Respectable 60' time
- Chassis/Cage building shops in Houston?
- Fastest Hot-cammed car?
- 12 sec guys help!
- Hal shock adjustment
- Tested ETDrags 9.5/15/26 vs ETStreet
- Shallow staging= Better ET's?
- Momo Steering Wheel is In!
- Drag racing videos (Grots vs MAC sound comparison)
- STB on/off for the strip
- Random Tech. torque arm?
- New Best at MIR Saturday 11.88 stock internals and 17in wheels
- New Best today with help of Tony's KO box
- Baseline on my 2002
- WHAT ABOUT LS1 TRUCKS?
- how much can DA diff of ~1000 affect times?
- new best for me. 12.0 at 118 with B1 & stock heads...
- M2000 Snell Rating Question - Meet Rules?
- New best with bolt ons
- What are some tricks to get the best E.T.?
- New Bests First Time Out With PT4000
- M6 Stock internal-11.752@116.51
- Good Day at MIR
- Yank VS PI---->Interesting fiindings
- Finally got the UT-4600 hooking
- Ghetto hatch pictures
- NFRA class ??????????
- New best & Short-Belt Mod Results
- Hey PSJ and Chris Endres.....yer famous!
- weight
- Video Larry S vs Track wall.
- How's this for awesome drag weather?
- ATCO results for Mike's (408), Brent and JS's Stage 2-X H/C
- What Rpm and PSI for Nittos
- New Best on G2 Heads and Cam
- Too much $, not enough time
- New best in the snow!!
- Help me pick my DOT tire!!! ET Streets vs. Hoosier QTP....tire stats inside!
- Chassy for the strip
- Thanx to Jay B. and Madman-->
- Is there a stock internal n/a list?
- Slight new best
- first time bracket racing and won
- CARTEK C-5 VETTE 10.84 at 127.93
- What kind of HP/ET gains could I lose by running only 1 02 simm?
- New best----->
- Part number for short belt with ASP pullies??
- HP needed for 120 mph trap speed?
- UCC Sign Up Board NOW OPEN
- Hoosier Quick Time Pro's
- Ohio, Indiana guys where you at?
- Jinx'ed night at the track !
- OMG, weighed my car
- New Best with FMS F4 Cam!
- WTB non power f-body seats
- 28" slicks on a lowered car?
- M6er who just ordered a '02 Z28 A4. Help point me in right direction.
- 1/4 mile perdictions, how low do ya think this will go???
- Braking problem while drag racing
- Correct burnout?
- Converter Guys, what's your MPH in the 1/8?
- Chip and exhaust?