10 Second Club - Was this a 10 sec pass video inside???

Well I went to our local track here in Arkansas "Centerville" and it is only a 1000ft track. I was wondering if you guys think this would be a 10 sec pass in the 1/4 mile here is what time slip shows.

SEC
60ft --- 1.58
330ft -- 4.63
1/8 --- 7.04 --- mph--- 99.55
1000ft --- 9.04 mph --- 115.83

Here is the video sorry about the quality
http://i261.photobucket.com/albums/ii46/assassinz28/th_MOV02738.jpg (http://s261.photobucket.com/albums/ii46/assassinz28/?action=view&current=MOV02738.flv)

My set up consist of full bolt on stock longblock MS4 cam 100shot of n20 th400 RMVB 4000k yank stall I was shifting around 6200 since I am not used to this trans and I was trying to avoid hitting the rev limmiter.

http://www.geocities.com/allstangs/Page.htm

according to this , right there at the door, but this is not always accurate.

Last night I went a 10.85 @ 128 with a 6.96 1/8th and a 9.08 1000ft so I'd say you had your self a 10sec pass!:thumb:

http://www.geocities.com/allstangs/Page.htm

according to this , right there at the door, but this is not always accurate.


Man thanks for the link & looking at that table I am right there I know I can get it 2-3 tenths quicker in the 1000ft since I ran 3 times in 30 min and my car was really hot when I ran my best and last run and next time I will not be shifting at 6200 more like 6500 at least.

Last night I went a 10.85 @ 128 with a 6.96 1/8th and a 9.08 1000ft so I'd say you had your self a 10sec pass!:thumb:

Thanks man that makes me feel better looking at your time we ran almost the same 1000ft time and I would be really happy with a 10.8xx pass :D but I guess I will just have to wait till May when I run at Pinks all out in Memphis to find out for sure.

Well I went to our local track here in Arkansas "Centerville" and it is only a 1000ft track. I was wondering if you guys think this would be a 10 sec pass in the 1/4 mile here is what time slip shows.

SEC
60ft --- 1.58
330ft -- 4.63
1/8 --- 7.04 --- mph--- 99.55
1000ft --- 9.04 mph --- 115.83

Here is the video sorry about the quality
http://i261.photobucket.com/albums/ii46/assassinz28/th_MOV02738.jpg (http://s261.photobucket.com/albums/ii46/assassinz28/?action=view&current=MOV02738.flv)

My set up consist of full bolt on stock longblock MS4 cam 100shot of n20 th400 RMVB 4000k yank stall I was shifting around 6200 since I am not used to this trans and I was trying to avoid hitting the rev limmiter.

I would think so!!

My car went:
60ft: 1.49
330ft: 4.459
1/8th 6.97 @ 97.59 mph
1000ft: 9.156 don't know the mph it didn't say..
1/4 10.996 @122.43 mph