Small Block & Big Block Chevy Specific - the right intake for this set up
F-Body Lover
04-12-2009, 12:28 PM
its a 383 5.7" rods with 2 valve reliefs Brodix Track 1 heads and big mutha thumpr camshaft should I go with air gap RPM or victor jr or any other intake? the car is 92 Z28 with 3200 stall and 3.73 gears on 27" tires and which intake gasket is the right one for Track 1 heads?
xx_ED_xx
04-12-2009, 12:53 PM
IF it is a street car I would say the air gap, IT will be more responsive but track only then the victor
F-Body Lover
04-12-2009, 12:55 PM
its a weekend warrior so should I go with victor jr?
1_bad_TA
04-12-2009, 12:57 PM
Go with the victor jr for a weekend warrior
raped 95Z
04-12-2009, 04:54 PM
vic junior no questions asked!
AutoRoc
04-12-2009, 09:45 PM
Fel-Pro 1206 gasket and Vic Jr Intake should be perfect and it has the best hood clearance. Goodluck.
STREETRODZ1
04-12-2009, 10:38 PM
You got to much cubic inch and camshaft for a RPM air gap, not to mention a nice set of heads. Go with at least the Victor jr.
xx_ED_xx
04-13-2009, 01:26 AM
you got to much cubic inch and camshaft for a rpm air gap, not to mention a nice set of heads. Go with at least the victor jr.
roflmao