Single Digit Club - 9.7X passes

ET on the first run was 9.74@137.67 with a 60 of 1.40
ET on the second run was 9.77@137.57 with a 60 of 1.42

Fairly consistent but the car was very rich 10.0 (lowest the WB reads)

Video below is from inside the car. I dont have any external video. While mainly diagnostic irrelevant. I still get a kick out of it.

Still working on it a bit, but thanks to you guys this is a new record for the car.

Photo
http://www.flickr.com/photos/fast-ta/3447792558/

Video
www.fast-ta.org/xvideos/2009/4152009.wmv

congratz what size shot are you running and your mods?

The shot was a progressed 250. Probably average 175. Its a built LS2 402. Heads/Cam porter FAST, kooks LT, with a th350 and a moser, full suspension mods, litenfelter 2 step. Plus all the normal saftey stuff. It hurts to think of how much ive spent on it.

The shot was a progressed 250. Probably average 175. Its a built LS2 402. Heads/Cam porter FAST, kooks LT, with a th350 and a moser, full suspension mods, litenfelter 2 step. Plus all the normal saftey stuff. It hurts to think of how much ive spent on it.

congrats! :cheers: i'm no expert but with a little weight reduction and perhaps with a higher stall, i don't see why this car wouldn't be 140mph car or better. Either way, fantastic job.

it costs a lot of money to go fast but that 9.XX time slip should make it all worth white! :D

the shot was a progressed 250. Probably average 175. Its a built ls2 402. Heads/cam porter fast, kooks lt, with a th350 and a moser, full suspension mods, litenfelter 2 step. Plus all the normal saftey stuff. It hurts to think of how much ive spent on it.


i feel ya on that im well over 25k into both mine and both of mine still dont run

so you gonna up the shot?

Well I have to go faster............ 9.0 would be nice, but i doubt i will get there with this combo even on a bigger shot. I think I can get probably another 2-3 tenths out of it safely.

nice runs, what was your 1/8 mile e/t and mph?