Automotive Careers - Performance Autosport in Richmond VA is looking for a Technician/Fabricator

Performance Autosport in Richmond VA is looking for a Technician/Fabricator...maybe even two

What an opportunity for some guys in our area! Performance Autosport's business is booming and they're looking to add another tech or maybe even two to their staff...it's out of my league of capabilities but I thought some of you guys may want to look into it that do the good stuff for a living. They have dedicated "do whatever it takes" service levels and offer a great workplace:salute:

here's a link:

Technician/Fabricator wanted Richmond Virginia

I saw PAS in the title and had to do a double take :)

For those that do not know, I am an independent tuner, but I am at this shop most days of the week. I am very proud to say that it is the dyno that I tune on here in Richmond.

The shop is spic and span and work is done right the first time. This is a good opportunity for a talented and motivated technician.

Here is the info:


Technician / Fabricator wanted

Performance Autosport is looking for Technician/Fabricator. We are an established performance/repair facility that is looking for a qualified Technician with fabrication skills, required familiarity with late model Chevrolet, Ford and building race cars. Must be able to set up suspension systems, bump steer and alignments, welding, sheet metal repair ,general repairs to all late/early model domestics, must have own tools and references, Pay based on experience, We are a very busy shop and need some to grow with us.Clean driving record required. Must pass back ground and drug test.

Mark LaMaskin
Performance Autosport
Saleen/Mustang/Lightning Sales
Dynojet / SCT tuning / Parts / Service
804-784-8851



You can send Mark a resume at Mark@PerformanceAutoSport.com

Another +1 for PAS.

They do great work, right the first time and expect a lot out of their technician. The shop is never ever dirty. Infact, I can't remember if I have ever seen dirt there.

ttt...

What a great job i fit every thing on the list your asking for except i dont have tools yet.

Graduating in nov 09 from NTI ( Nascar technical institute branch campus of UTI )

*Trained technican in basic automotive
*Taking 3 fabrication classes including welding
*Taking chassis class so I undetstand suspension set up
*Taking the performance engine classes that covers engine tear down and rebuild, engine dyno, flow bench, chassis dyno
*6 months experience at tire shop
*Worked at an autoparts store
*now work as part of management at CVS
*voluntered for Joey McCarthy racing team for Nascar north busch series
*Have a good GPA, attendence and professionalism

~Matt Westerfield~

.....


Matt,

Send your resume to Kevin@performanceautosport.com or Mark@performanceautosport.com

To anyone else reading, there is still a position available.

back ttt

little far for me, but last 2 years i have been working for a place that makes cranes, i worked on 50-180 ton cranes by blue print welding and re work, and NDT 70% MT 30% UT. b4 that i worked at a toyota dealer for a year 6 days a week 8- 10 hrs a day while still in school and taking night school 4 days a week. my free time goes to my ta and my buddys cars auto fab time is limited, i can make all kinds of shit and weld mig like a pro (ex-pro that is). little bit of time with hp tuners, but tons of talk with frost. pm me and let me know how much u guys are looking to pay and a better idea on what i would be working on..