Canadian Classifieds - FS: Laundry list of 4th-gen Camaro parts

Aftermarket aluminum rad - same dimensions as stock (29" x 19") but twice as thick - $150

BMR Weld-on Relocation Brackets - brand new, never installed (obviously) - $50

Factory LCA's (off my '02 Z28, maybe ~50k on them?) - still in great condition - $50

Sway Bars: I have a Suspension Techniques 25mm rear bar (Sold), factory 30/19mm Z28 bars ($60), and a C4 Corvette front bar ($30).

Factory 16" x 8" "snowflake" wheels. One pair has Hankook H405's, 245/50/16, the other pair has BFG Drag Radials, 255/50/16. All 4 tires have approx. ~3mm of tread remaining (still above the wear bars). The DR's were only used at the track on two occasions, maybe ~12 passes total, and driven ~1000kms or less total. They're still in great shape. The wheels need a good cleaning - $350 for the 4 wheels & tires (willing to separate).

Factory T-top sunshades - brand new, still in original plastic - $75

Factory cowl for LT1 Camaro (with custom vents). Comes with the gas prop rods, and I have the hood hinges available as well - $75

Also have LT1 Camaro ABS module, cruise control module, stock air intake box, elbows, etc. - best offer.

All prices are "suggested" asking prices! Open to reasonable offers on all parts.

Please send PM if interested.

Thanks,

Pete

Pictures can be viewed here: http://s730.photobucket.com/albums/ww306/Capn_Pete/Camaro%20Parts/

ill take the header off from u pm me your #

PM sent.

The t-top shades, what color are they? Im needing a pair...summers get hot out here in BC, lol.

They're the very dark grey (ebony?) from my '02 Z28 that had the ebony/leather interior.

We don't seem to get summer anymore in Ontario! :rolleyes: :lol:

Let me know if you're interested - since they're relatively small, and very light, I'm sure it wouldn't cost much to ship them out your way :cool:.

A couple items have sold, but I still have all the rest of this stuff. Would love to see someone get use from it all!!

Feel free to make reasonable offers :cheers:.

could you send me some more info about the rad and a pic?

i also would like to know more about the rad. brand and fitment

Guys, here are the pictures of the rad:

http://i730.photobucket.com/albums/ww306/Capn_Pete/Camaro%20Parts/CamaroParts.jpg
http://i730.photobucket.com/albums/ww306/Capn_Pete/Camaro%20Parts/CamaroParts1.jpg

All I know is that when I compared it to a stock LT1 rad, the core of this one appeared to be twice as thick, but otherwise same dimensions (height, width, and thickness of the tanks). I don't see why it wouldn't fit into the stock location. It came in my race car though, and it had already been converted to a front-breather, and the guy made up some custom bracketry to hold the rad in place (so it wasn't sloped back like stock, or held with the normal plastic rad cover/support piece).

When I "upgraded" to an even thicker rad in the car, it didn't solve the cooling issues I was chasing (turned out to be poor airflow through the engine bay) so I know there's nothing wrong with the rad or its ability to cool the engine.

I'm open to an offer. It's just sitting in a box in my shed!! :cool:

I'm open to offers on all the remaining parts. They're all just collecting dust! ;)