Tony B4
08-30-2009, 10:32 PM
Sold......Sold........Sold........Sold
2006 C6 A6, 1LT, Lemans Blue with Comp grey wheels.
Mods list:
Cartek 3X Cam
Comp 921 dual springs
Manley harden push rods
Meziere eletric waterpump,160 t-stat, with Zip products wiring harness
Kooks SS headers 1 3/4 with 3' x-pipe and highflow cats
Port Matched Fast90 intake with carbon fiber paint/overlay
Ported stock throttle body
Passenger side 300M out put shaft
B&B Rt.66 catback with 4' rounds tips
Brialle 15lbs gell cell battery
Asp 10% underdrive pulley/belt kit
Vararam cold air intake
Vigilanti 3600 stall converter
Floyd embroyder front and rear mats
Lemans Blue fuel rail covers
All these mods cost over $11,000+ if you had them installed like I did. I have all the stock parts that I had taken off the car except for the stock H-pipe for the stock exhaust system.
A little history on the car: I ordered it in march of 2006. Have sheets to follow the status codes of the build. Got my Vette in June of 2006. In 2007 I had just over 3000 miles and had headers,vararam,and 160 t-stat installed. The car dynoed in a 356rwhp and 352rwfts. In 2008 with 6000 miles, I had the car in for a cam,fast90,underdrive pulley,converter,ported throttle body, and harder shaft. The car dynoed in at 441rwhp and 386rwfts. This year of 2009 with 9500 miles, I had the car in for an update on the tune, plus I added a meziere electric water pump, and new 3600 stall converter, the car dynoed at 466rwhp and 411rwfts. This is a cam only with bolt ons A6. The heads are stock, the compression is stock, the gears(2.56) are stock, the car still retains the factory stock spark plugs.
Currently, I have 10,800 miles.
http://www.digitalcorvettes.com/corvette-photos/data/655/2141.JPG
http://www.digitalcorvettes.com/corvette-photos/data/655/2161.JPG
http://i261.photobucket.com/albums/ii46/TonyB4_album/Scan-3.jpg
Video of idle with Cartek 3X cam http://s261.photobucket.com/albums/ii46/TonyB4_album/?action=view¤t=003_converted.flv
Video of record holding fastest cam only A6 pass is in my signature.
If your a serious buyer, please contact me through a privite message(pm) here with a name and phone number that you would like me to contact you with.
My selling price is $33,500.
Thanks for looking,
Tony B.
2006 C6 A6, 1LT, Lemans Blue with Comp grey wheels.
Mods list:
Cartek 3X Cam
Comp 921 dual springs
Manley harden push rods
Meziere eletric waterpump,160 t-stat, with Zip products wiring harness
Kooks SS headers 1 3/4 with 3' x-pipe and highflow cats
Port Matched Fast90 intake with carbon fiber paint/overlay
Ported stock throttle body
Passenger side 300M out put shaft
B&B Rt.66 catback with 4' rounds tips
Brialle 15lbs gell cell battery
Asp 10% underdrive pulley/belt kit
Vararam cold air intake
Vigilanti 3600 stall converter
Floyd embroyder front and rear mats
Lemans Blue fuel rail covers
All these mods cost over $11,000+ if you had them installed like I did. I have all the stock parts that I had taken off the car except for the stock H-pipe for the stock exhaust system.
A little history on the car: I ordered it in march of 2006. Have sheets to follow the status codes of the build. Got my Vette in June of 2006. In 2007 I had just over 3000 miles and had headers,vararam,and 160 t-stat installed. The car dynoed in a 356rwhp and 352rwfts. In 2008 with 6000 miles, I had the car in for a cam,fast90,underdrive pulley,converter,ported throttle body, and harder shaft. The car dynoed in at 441rwhp and 386rwfts. This year of 2009 with 9500 miles, I had the car in for an update on the tune, plus I added a meziere electric water pump, and new 3600 stall converter, the car dynoed at 466rwhp and 411rwfts. This is a cam only with bolt ons A6. The heads are stock, the compression is stock, the gears(2.56) are stock, the car still retains the factory stock spark plugs.
Currently, I have 10,800 miles.
http://www.digitalcorvettes.com/corvette-photos/data/655/2141.JPG
http://www.digitalcorvettes.com/corvette-photos/data/655/2161.JPG
http://i261.photobucket.com/albums/ii46/TonyB4_album/Scan-3.jpg
Video of idle with Cartek 3X cam http://s261.photobucket.com/albums/ii46/TonyB4_album/?action=view¤t=003_converted.flv
Video of record holding fastest cam only A6 pass is in my signature.
If your a serious buyer, please contact me through a privite message(pm) here with a name and phone number that you would like me to contact you with.
My selling price is $33,500.
Thanks for looking,
Tony B.