10 Second Club - My first 10 sec pass!!!

1st pass - 60' 1.606 - 10.95 @ 126.49
2nd pass - 60' - 1.514 - 10.90 @ 126.71

The clutch slipped pretty bad on the second pass. So I called it quits. I'm just happy I got it in the tens!:nod: Oh yeah. The TA is a M6 with a D1-SC. Stock short block, heads, 22X 58X cam and bolt-ons.

1st pass - 60' 1.606 - 10.95 @ 126.49
2nd pass - 60' - 1.514 - 10.90 @ 126.71

The clutch slipped pretty bad on the second pass. So I called it quits. I'm just happy I got it in the tens!:nod: Oh yeah. The TA is a M6 with a D1-SC. Stock short block, heads, 22X 58X cam and bolt-ons.

Congrat's now update sig, you were first car to run I believe? I was like 6 back from you and got a 10.62 to start off but traction wasn't there for me all night.

Yeah, that was me. Traction wasn't an issue for sure. I drove through the clutch on every shift on the second pass. That was my 10.90! Maybe a bias ply tire would help you. You're making more power than me. I'll try to get a video up.

http://i128.photobucket.com/albums/p195/WS6SRT-8/th_PICT0005.jpg (http://s128.photobucket.com/albums/p195/WS6SRT-8/?action=view&current=PICT0005.flv)

http://i128.photobucket.com/albums/p195/WS6SRT-8/th_PICT0005.jpg (http://s128.photobucket.com/albums/p195/WS6SRT-8/?action=view&current=PICT0005.flv)

What do you have for suspension? As for clutch I recommend the one I just put in mine, Mcleod Twin Disc. I should have borrowed that camera, I'd like to see my suspension travel.

What did you run for 1/8 et and mph and what gear do you have out back? You go in forth really early compared to me going into just before 1/4 mile.

1/8th 6.997 @ 98.42. I have 3.89's. I wouldn't base too much off that one. That thing was slipping pretty bad. I really thought it was gonna be slower. I wish I taped the first pass. I think it would give you a better idea. And I already Pm'd Andy for some prices on clutches.:nod:

Congrates Ron but you have yet to beat my 10.89, LOL. Wish i could have been there, now yours and 01z28camaro's cars are launching like my auto. What was the 1/8 and trap speed? I'm making a few tweeks to mine right now and hopefully i can squeeze out a 10.7 run, The air was awesome that night.

If i got nitrous then all of our cars would have a different power adder.

What did you run for 1/8 et and mph and what gear do you have out back? You go in forth really early compared to me going into just before 1/4 mile.

Did you get the o-rings fixed? you went from 128 to 132 from last week, or do you think it was mainly the air?

Did you get the o-rings fixed? you went from 128 to 132 from last week, or do you think it was mainly the air?

Changed orings, looked like small leak on drivers side, much better then before. Also took reference for boost off turbo and put to intake, now it spikes a little more and holds boost longer, Its all mute as I should have me expensive ass eboost2 on it tomorrow. I hate trying to control boost with manual ones. I want 5 for regular street driving and go up to 12 for racing and in between.

Fwiw I went 6.7 at 105 mph in the 1/8. I was holding boost a little better but with no changes from first to second and last pass I gained 2 mph. Second pass was at 8 something, better air for sure, you would have did good.

Another video of the slipping clutch. http://www.youtube.com/watch?v=yPlhx00bx8o

congrats man!!!

Congratulations on making that magic number in the 10s. Seems like we are all getting there a different way but it feels just as sweet!

Welcome to the 10 second club. :cheers:

Thanks guys!

welcome to the 10 second club. :cheers:


+1!!!!!

Congats!!!

Welcome to the 10sec Club!
Now get that SRT in to the 11's

Welcome to the 10sec Club!
Now get that SRT in to the 11's

My pockets aren't deep enough right now.:lol: What did it take to get yours there? Oh and thanks.

Charger ran 12.96@109mph 1.96 bone stock

MODS:
CAI
180 TS
Corsa cat back
High flow cats
DiabloSport Predator tune
M/T Drag Radials
That's All!

I just installed 85mm TB
Next CMR Dyno Tune

Nice!

nice.