Sponsor Group Purchases - Moser and Strange Rear end GP

I've done a few rear GP's for this board and they've all gone well so I'm here to offer another for you guys looking to get those fall runs in. I'm a dealer for strange, moser, and pst so I should be able to cover all your needs for rear ends and driveshafts.

Here are some of your choices:

Strange 12 bolt
Strange S60
Moser 12 bolt
Moser 9"
Moser M9

I can offer free shipping ($150-175 value) and $75 or so off the price that way you're instantly saving over $200.

I would need 5 purchases to make this a go so let me know what you're looking for and I'll get prices or if you're not sure what you need tell me what's done to your car and I'll help you make the right decision.

how much for a s60, with a trutrac,35 spline axles, 3 channel abs, ready to bolt in shipped to 34731

same as above shipped to 78934

PM's sent

I am going to get one for sure

Moser 9", 35 spline, detroit locker, 4 channel, 3.42 gears, backbrace, drain plug, ready to bolt, to 97006

How much for a 12 bolt moser 3.73 gears 35 spline 4 channels abs/tcs

Looking for a 9 inch trutrac 3.89 gears largest axles that the trutrac allows. price both aluminum and nodular and both with 4 channel abs/tcs and without 4 channel abs/tcs. Unpainted

How much for 9 inch trutrac, 3.73's (or somewhere close to that), 35 splines, no ABS, painted black I guess, shipped to 93041? Thanks.

PM's sent with pricing, if I missed anyone please pm me.

can you price both the strange and the moser 12 bolt painted with something close to 3.80-3.90 gears, HD limited slip, standard axles, price with and with out 4-channel. also do if you sell HD aluminum driveshafts could i get a price

can i get a price on strange 12 bolt ready to bolt in 4.10 gears, and standard axles and studs, 4 channel abs, and shipped to 70339?

Price for an Strange s60(PRSF05) , Detroit Locker option,35 spline axles, 373 gears, 3 channel abs, chrome moly yoke. Shipped to 75143
Thanks,
Jim M

price for a strange 12bolt, spool, 35 spline stock width, LCA relocation brackets welded on and torque arm mount, 4 channel. un painted. unsure of what gears i want so just a general price for the most expensive i guess.

can i get a price on strange 12 bolt, 4.10 gears, and standard axles and studs, 4 channel abs, ready to bolt in and shipped to 92886?

how much for a Moser 9", 35 spline, detroit locker, 4 channel, 3.70 gears, , standard LCA, drain plug, ready to bolt in

How much for just the moser 9" housing with 35 spline axles.

Sorry guys, I was out of the shop with racing related stuff all weekend but I believe I'm caught up now on quoting everyones pricing. Lets get the ball rolling here as I'd like to wrap this special up by november.

PM sent...

Thanks in advanced...
--Mike

Pricing sent

Price on Strange posi 12 bolt & S 60. My cars both have traction control but dont care if it is disabled(prefer to disable it) but where I live I have to get emission tested & they wont pass a car if the brake light is on. Not sure if a 3 channel is installed in a 4 channel car will light the brake light, they plug in so even if I pull the bulb they know.

price on- for 4thgen fbody

moser 9" nodular case, 35spline axel, spool, 3.50 gear, back brace, TA mount, 5/8 wheel studs.

also whats a quote for just the 9" housing and 35spline axels.

thanks,

Tyler

Can i get a price for everything i need to install a Moser 12 bolt with 3.73 gears. Rear went out a few days ago.
Thank You

Can I get a price on a m9 locker w 35 spline axles 3 channel abs. and what ever else is needed for the conversion shipped to Calgary Ab. Canada. I'll pick it up at the shipping depot here. Also how much cheaper with a reg 9" housing.
Thanks,Chris.

Recieved package- have a slight issue, PM sent

PM's sent

Can i get a price for everything i need to install a Moser 12 bolt with 3.73 gears. Rear went out a few days ago.
Thank You

looking for same thing have same story shipped to74017

looking for same thing have same story shipped to74017

Do you need abs? If so 3 channel or 4 channel?
What differential are you looking for?

Pm sent

Can you email me a price for an s-60 with the 35 spline true trak, 4:11 gear 4 channel abs with new backing plates? How much extra for a cromoly yoke? Also will need a driveshaft and an aluminum cover. shipped to 18337 Thanks

Ryan

price on a 12 bolt?
3.90's, locker, 4 channel. i have a spare set of backing plates if they are easy to install on them.

Price on 9" complete rear, 4.10s. true trac, 3 channel.
Thanks

All PMs sent and all orders must be placed by Monday Nov. 16, after that this group purchase will be closed.

price on s-60: 4.10, posi, 4 channel, abs, 35 spline trutrac, standard everything else. Would have jumped on this sooner but i have lacked internet while moving.

price on s-60: 4.10, posi, 4 channel, abs, 35 spline trutrac, standard everything else. Would have jumped on this sooner but i have lacked internet while moving.

Quote sent. If there's anyone that wants to buy and has been waiting please get your order in because I'm closing this GP.