Dyno & Bench Racing Forum - Can I make a 10.99 or quicker
Ls1ChevyII1963
10-03-2009, 12:08 PM
Car is a 1999 z28 with
Full Exhaust
Lid,FAST 92mm Setup,Smooth Bellow
TrickFlow 215cc stock chambers
COMP 232/237 112lsa .603 .605
4160e 4400 stall through 10 bolt with 3.73s
on weld Draglites and drag radials
Weighs about 3250 with me in it
Putting it all together this weekend and just wondering if a 10 second pass is possilble.
Gaunt
10-03-2009, 01:10 PM
Doubtful, according to what you put right there.
Do you know what kind of power that's putting down? Also, stock cam still? I would think that would go with a set of trickflow heads, but maybe I'm wrong.
I would put you somewhere in the 11s with that setup if you truly do have a stock cam still.
Ls1ChevyII1963
10-03-2009, 01:32 PM
Doubtful, according to what you put right there.
Do you know what kind of power that's putting down? Also, stock cam still? I would think that would go with a set of trickflow heads, but maybe I'm wrong.
I would put you somewhere in the 11s with that setup if you truly do have a stock cam still.
Completely forgot to post cam specs they are 232/237 112lsa .603 .605
Gaunt
10-03-2009, 01:34 PM
Completely forgot to post cam specs they are 232/237 112lsa .603 .605
I was going to say, that would be one hell of a shitty setup on a stock cam lol.
With your raceweight at 3250 and you being inside....you would need a nice DA to get it done, but it's possible. What drag radials? Nittos, not a chance, mickey thompsons, possible.
Ls1ChevyII1963
10-03-2009, 01:50 PM
M/Ts for sure.
navyblueSS
10-03-2009, 06:42 PM
If it hooks I think you will be in the 10's.
unit213
10-03-2009, 07:29 PM
Low 11's are realistic. I highly doubt you'll see a 10.99.
late to the party but yeah, I'd agree that low elevens are there but everything would have to be spot-on to get a 10.xx i think.