Dyno & Bench Racing Forum - Stalled WS6 1/4 mile and hp guess

Based on the info given below what do the pros think? I will find out soon, but just very curious

what tires you runnin? I'd say you could definitley see high 12's with the mods in sig, maybe like a 12.8 or so, but hey i've only ran the eigth so what do i know lol

I'd say you'd be closer to low 12s on a good tire

I will almost forsure run stock ws6 wheels on 275 bfg kdw since my 19 replicas are heavy and the tires cost so darn much to see go up in smoke. Future goal is to widen stock wheels to fit some real meat (315)

Will also have a "real tune" completed before I hit the track. Now only if I can decide on the tuner. Synergy Motorsports or Newtech?

Street tires will kill your time. Launching a 3600 stall on street tires is gonna be pretty much useless. Upper 12's without tires, mid-low 12's with a tire.

I will almost forsure run stock ws6 wheels on 275 bfg kdw since my 19 replicas are heavy and the tires cost so darn much to see go up in smoke. Future goal is to widen stock wheels to fit some real meat (315)

if it hooks up id say low 12's are possible

Street tires w/ good 60s like 1.8, my guess would be mid 12s. With sticky tires, low 12s with the same 60s or better.

12.23

RWHP guess would be around 310-320ish.

Well my setup was real simlar to yours except I had a 4000 stall. I will say without slicks . 13.2-13.5. With slicks 12.3-12.5. with a 1.7 sixty foot. My best run was a 12.30 with a 1.61 60' in 1800 DA. Thats was with slicks dead hooking.

That setup on a street tire and the road race style suspension you have? 13 flat at best with lots spin.

Put some sticky tires on it and drop the front sway bar and you might see mid to low 12s.