Drag Racing Results - Best 60' times bolt on only??

Stock weight, with bolt ons I turned a 1.59 60' last Saturday. Is this up there with the bolt on only crowd?

Thats pretty solid, goodwork! That's what mine did.. I had some weight out too though.. stock springs and shocks etc..

Nicework:usa: what did it run?

Thats pretty solid, goodwork! That's what mine did.. I had some weight out too though.. stock springs and shocks etc..

Nicework:usa: what did it run?

Thanks. ran 12.50 at 106... we don't usually get good da here. Da was 3200 on that pass

Thanks. ran 12.50 at 106... we don't usually get good da here. Da was 3200 on that pass

Yea DA is a killer...

FWIW corrected your time is 12.018 @ 110.335 MPH, granted that doesn't mean much, but it lets you know your car is running good but DA is killing it.

Yea DA is a killer...

FWIW corrected your time is 12.018 @ 110.335 MPH, granted that doesn't mean much, but it lets you know your car is running good but DA is killing it.

lol, I get so jealous of times like yours, especially that awesome mph. I am going to lighten it a little and put a home made FTRA on the car.

lol, I get so jealous of times like yours, especially that awesome mph. I am going to lighten it a little and put a home made FTRA on the car.

Nah don't be jealous, your car is running good! Take weight out, get a good ram-air setup and run in good DA and you car will run very similar times! Nothing special about my car, I promise!

1.52 60'

11.96 @ 111 last friday nite in the wifes bolt on A4 Formula.

headers, duals, pulley, lid, 4000 converter, and 4.10's on 275/60 dr's.

1.52 60'

11.96 @ 111 last friday nite in the wifes bolt on A4 Formula.

headers, duals, pulley, lid, 4000 converter, and 4.10's on 275/60 dr's.

that is moving out of the hole. Did you pick up much with the pulley? any weight reduction?

My best so far has been 1.57 on 275/40/17 mt's. Suspension mods: qa1 coilovers, boxed sfc, and stock rear suspension.

Pulled a 1.556 tonight. 12 bolt w/ 3.73s and 275/50 Hoosier drag radials. Stock shocks, springs, and rear sway bar. 3420 raceweight, 2180 DA. Pass ended up being an 11.78 @ 113.75. I'm gonna be in the top 15 easily on the stock internal list within a few weeks. We usually get some nice -1000 DA here in the fall.:D

1.58 60' with an 11.84@113. Full bolt on with Eibach lowering springs. Everything else on the suspesion is stock.

Some of these other guys are pulling killer 60' ft!!!! Do most of you work on suspesion?

nice 60's guys.....definately humbled me in a hurry :chug:

Stock weight, with bolt ons I turned a 1.59 60' last Saturday. Is this up there with the bolt on only crowd?

What size MT's are you running?
Thats a damn good 60'!:usa:

What size MT's are you running?
Thats a damn good 60'!:usa:

Thanks! 275 50 15

My best is 1.75's, mods are listed in my sig. 12.28 @ 111.96

Bracket racer, where do you race at??? I race at Gateway Raceway, we're a division 3 track.. We made just about the same exact horsepower too! haha

My brother has gotten into the 1.6s with his 99 Z28, (headers, 4.10s and 3600 stall) He went a 12.30 with just the headers and 4.10s

My best is 1.75's, mods are listed in my sig. 12.28 @ 111.96

Bracket racer, where do you race at??? I race at Gateway Raceway, we're a division 3 track.. We made just about the same exact horsepower too! haha

I race at Speedworld in north phoenix area.

I need to get a stall, my best 60' time is 2.01.....

people have gone 1.50s with 4000 stalls at a decent raceweight...

best i could get with my ss3600 was 1.54 at 3365 raceweight in -900DA, good luck bud