Drag Racing Results - New personal best 9.87@134.8 stock C.I. LS2

I went to a rental today at Atco Raceway in NJ. I ran a new personal best with my new motor. This is the first time out with it and it is a Stock Cubic Inch LS2 that utilizes stock crank,rods,and pistons. I know how some guys get all wired over a "stock bottom end" declaration so please note I am not doing that. I ran a handfull of 9 second passes the best of wich I list below

60 - 1.30
330 - 3.98
1/8 - 6.24@108.3
1000 - 8.20
1/4 - 9.87@134.8

I backed it up with a 9.88 a 9.92 and a 9.95 with the passes going from slowest to fastest in order. I'd like to thank Kaltech Tuning here on Long Island Brian came along for the day and helped iron out some short shifting issues early on in the day. Kaltech is a sponser here and have done a flat out awesome job with my Speed Density tune I really could not ask for any better. If your near the island and need tuning look them up. Chris from Circle D conveters this guy is a gem as well. I'm tellin ya these guys build a PERFORMANCE converter and the customer service is flawless. I am in NY they are in Texas and let me tell you I could not get better service from any local. My Performabuilt tranny has yet to miss a beat out there either. She still shifts like the bricks! Frank is this your first 9 second transmission?

JOSEPH has spent alot of time helping me along the way with this motor. Big thanks to him again. What can I say JOSEPH I came close dude even with the extra 18 cubes I could'nt crack that .82

Congrats JOhn.. :) Long Time Coming...

sweet times man that is hauling...man it looks like i am going to have to put that cam in my car now...always loved the g5x4

also i hate to break this too you but they ran an amazing 9.66 now...but you got some pounds on them :), very impressive

I'm not surprised LOL I was on the phone with him a few weeks back he told me about some of the new improvements that were in store for the shootout. Congrats to them!

I went to a rental today at Atco Raceway in NJ. I ran a new personal best with my new motor. This is the first time out with it and it is a Stock Cubic Inch LS2 that utilizes stock crank,rods,and pistons. I know how some guys get all wired over a "stock bottom end" declaration so please note I am not doing that. I ran a handfull of 9 second passes the best of wich I list below

60 - 1.30
330 - 3.98
1/8 - 6.24@108.3
1000 - 8.20
1/4 - 9.87@134.8

I backed it up with a 9.88 a 9.92 and a 9.95 with the passes going from slowest to fastest in order. I'd like to thank Kaltech Tuning here on Long Island Brian came along for the day and helped iron out some short shifting issues early on in the day. Kaltech is a sponser here and have done a flat out awesome job with my Speed Density tune I really could not ask for any better. If your near the island and need tuning look them up. Chris from Circle D conveters this guy is a gem as well. I'm tellin ya these guys build a PERFORMANCE converter and the customer service is flawless. I am in NY they are in Texas and let me tell you I could not get better service from any local. My Performabuilt tranny has yet to miss a beat out there either. She still shifts like the bricks! Frank is this your first 9 second transmission?

JOSEPH has spent alot of time helping me along the way with this motor. Big thanks to him again. What can I say JOSEPH I came close dude even with the extra 18 cubes I could'nt crack that .82


Yes I do beleave you are the first proven 4l60e to hit the nines :)

Awsome times, congrats that is flying for the cubes. Very well done indeed.
What was the DA and your weight if you do not mind?

Congrats john!!!!

Congrats again and I'm glad I could help you out. Don't anyone be mistaken, this is truly a homebuilt car. The only stuff that wasn't done in jfm's driveway or garage was the transmission build and tune, otherwise this is a car that him and his father gone through over the years being very detail oriented to create an overall setup that runs hard and still uses lots of GM factory components.

Congrats to both of you and I think it's time for a title change under your name.

Congrats on the amazing #'s!!!! Glad to have you as a customer. The new 230mm seems to be a perfect match for your setup.

Chris

Yeah big thanks to my Dad his screen name here aptly is "jfm". He bought this car brand new and there is a long history with us and this car. We spent many great days at the track together starting out in the low 13's with this car.

Way to go man!

That is awesome to see! big Big BIG Congrats!

That is VERY impressive guys. Way to go.

Congrats man . Its been a long time coming... Who would of thought a 6 year old set of Absolute speed 5.3`s would still be putting it down.

Big Props to all involved :
JFM and JRM Jr
Kaltech
Circle -D
Performabuilt
J+T auto
Joseph
Absolute Speed <-- What LOL couldnt help myself
LG

congrats on the new best

Big time congrats.

Coach

Nice times and I really like using a 4l60e running 9's, if there would have been good 4l60 builder's back 5yrs ago I would still have one in my T/A. What gear/tire are you running out back?

ALL RIGHT-Been waiting for the 9s.
Come a long way from 13.3s @ 106 stock.
Got to love those funny looking LS motors.
Wish I could have been up there,next time.

Congrats JFM-JR on you new PB,has got to be a lot of fun running in the 9s with those cubic inches.I had my circle d restalled once now and im back to pt4400 times. High 1.30s.On the other hand my son Chrs1313 has gone a new low of 1.35 60 with a cam only Yank SS4000.Go figure that out for me!!!! Congrats again !!!!

congrats bro. I wish i was there to see it.

60 - 1.30
330 - 3.98
1/8 - 6.24@108.3
1000 - 8.20
1/4 - 9.87@134.8


JOSEPH has spent alot of time helping me along the way with this motor. Big thanks to him again. What can I say JOSEPH I came close dude even with the extra 18 cubes I could'nt crack that .82


Huge Congrats! :eek2:

No problem with any help, 9's are no small feat. :D

sweet runs man thats hauling for sure :D