Corvette Performance - Procharger Install, How Hard Is is on a C5z



PDA
1979transam
10-20-2009, 12:58 AM
I got a 2003 Z06 that im fixing to procharge, but im wanting to save some money and do it myself, so im wondering how hard it really is to install it. i have pulled the motor out of my 00 WS6 and built another and put it back it so i do have experience with the LSX motors, but i was just wanting to know how hard it really is,

Thanks for the help guys,
Billy :chug:

heavy6.0
10-20-2009, 01:06 AM
if you have done an engine swap you wont have any problem at all. should take you about 6-8 hours to do. If you havent purchased the kit yet we are having a super special on them right now. give us a call!
1979transam
10-20-2009, 02:36 AM
okay man thanks alot, ill give yall a call tomarow!!!

Exotic Performance Plus
10-20-2009, 05:38 AM
http://www.exoticperformanceplus.com/customerWebPages/index.php
Customer Car Section

http://www.exoticperformanceplus.com/projectCars.php
Project Car Section

I have quite a few C5's in the above two sections of my website with ProChargers installed on them. The installation is pretty straight forward on a C5. Bob
rzuff
10-20-2009, 05:03 PM
Pulling the rack and pinning the crank are the hardest part. The rest isn't that bad just pay attention to the proper routing of everything!
heavy6.0
10-20-2009, 05:28 PM
yep, once you get past that point it is basic. :chug: