Dynamometer Results & Comparisons - Going to the dyno tomorrow, any guesses?




speedfreak2685
10-23-2009, 07:52 PM
Any guesses to what it will make?
Mods:
99 z-28 M6
Ms4 cam and supporting valve train.
Stock heads and bottom end
ftp 98mm lid/ fram filter
85mm delphi maf
fast 90/90 self ported
1 7/8" tsp long tubes
tsp 3" y-pipe
loud mouth 2 exhaust with moroso spiral flow muffler
tr5gp plugs gaped at .046/ msd plug wires
truck coil packs (going to do a back to back dyno on these vs. stock ls1 coils)
spec 3+ clutch and steel flywheel
160 thermostat
Stock 10 bolt rear and gear, and all stock pullies.

The car last dynoed at 403/370 with a (in my opinion) crapy tune, slp lid, stock maf, k&n, Fast un-ported, stock coil packs.
It is now street tuned which are'nt dyno queens by any means. The power shows on the street/strip. I will post up what it made when I get back tomorrow.


squale iii
10-23-2009, 07:55 PM
That seems awful low (403). I made 403.xx whp with my untouched LS6 intake. Just made 423 with my new ported FAST 92/92...With a good tune I can't see why you wouldn't be significantly higher.

speedfreak2685
10-24-2009, 01:17 AM
That seems awful low (403). I made 403.xx whp with my untouched LS6 intake. Just made 423 with my new ported FAST 92/92...With a good tune I can't see why you wouldn't be significantly higher.

My thoughts exactly. That why I said crappy tune lol


Z-28
11-21-2009, 12:04 AM
You might get 410/375 with a better tune

blubyu02
11-21-2009, 01:24 AM
my guess is 421/390

blackedout drop ls1
11-21-2009, 01:40 AM
my guess is 433 394

Z-28
11-21-2009, 06:37 PM
Did u ever go and find out what it did?