35th camaro
10-24-2009, 03:05 PM
can i use my ls1 balancer on my ls2 stroker 402 and is it the same bolt ?
Generation IV Internal Engine - ls1 balancer on 402
View Full Version : ls1 balancer on 402
1sick'98WS6
10-26-2009, 02:18 PM
Yes and Yes. Use a new GM bolt because they stretch after being torqued, or go with ARP
WADDISME
10-28-2009, 11:54 AM
Yes and Yes. Use a new GM bolt because they stretch after being torqued, or go with ARP
Definitely. Just make sure you use a new bolt and follow the correct installation procedures. Mine walked off the crank while on the dyno:eek2:. I would suggest using the ARP bolt, why take a chance. Would have saved me $300.
Definitely. Just make sure you use a new bolt and follow the correct installation procedures. Mine walked off the crank while on the dyno:eek2:. I would suggest using the ARP bolt, why take a chance. Would have saved me $300.
KJ@DHRC
10-28-2009, 10:20 PM
Yep your factory balancer will work perfect and like the others said you will need a new GM bolt or an ARP bolt. We would be happy to give you a deal the GM or the ARP balancer bolt if you need one!! I could ship it out tomorrow and have it to you by Friday!!
35th camaro
10-29-2009, 06:38 PM
thanks guys, i already have one.