Dynamometer Results & Comparisons - Retune:465/430 is there room for more?

Ok im very pleased with my numbers i put down especially in 5500 ft above sea leavel.Is there anything i can do to squeeze 500 N/A, i think the car had at least 5 more hp left.
Ive got terminator heads, custom grind compcam, FAST90/90tb, Full exhaust, 4:10 6 speed.
how much will cut/outs, pully, maybe porting get me?
I know the track is were you really know how fast a car is, just wanna max out my N/A without moving my H/C/I set-up.

thanks

porting maybe 7-10rwhp and cutout 7-10...What is your full exhaust setup? 1 7/8 could help you too.

What are the cam specs?? If its like a 220ish cam you could gain a lot. If you already have 230+ cam you might not have much to grow. Not really sure about those heads either.

Have a professional porter take your intake and heads and have the FAST runners built up / smoothed out for a nice transition so that you get rid of the NASTY step up into the intake port.

Search my threads for a picture of what I'm talking about. Could be worth some good power all over.

Very nice numbers Congrats I've see 4-6 cars with Terminator heads all of them made great numbers.

Get a pulley,cutout, send your Intake and TB to Ron@vengeance racing or Tony Momo @AFR.
I'm sure you can get close to 480-490rwhp.

What is the spec of the cam??

How much is it to match port my heads and Intake?
I dont know the specs, previos owner said it was the biggest he could go. guessing
23x/24x on a 650lift.

How much is it to match port my heads and Intake?
I dont know the specs, previos owner said it was the biggest he could go. guessing
23x/24x on a 650lift.

Intake porting goes aroung 200-300 and head porting I dont know! How high do you spin? I'tll give us an idea of the size of the cam. 23x-24x should be close to 6800..

Intake porting goes aroung 200-300 and head porting I dont know! How high do you spin? I'tll give us an idea of the size of the cam. 23x-24x should be close to 6800..

yea about 6800