Eastern Members - When Ya Break, Break It Good!!!!

Thats what i do. When i break something i do it all out. I dont partially break something. Like a clutch slip on me and then go on the trailer.

I go out dump the clutch at 5000rpm with a 200shot out of the hole!
I get towed of the track and winched on the trailer.

http://quicktimeperformance.com/Pics/Brokenring.jpg
http://quicktimeperformance.com/Pics/Brokenpinion.jpg

Now its time for an upgrade.
Moser M9 Baby!!

http://quicktimeperformance.com/Pics/M9.jpg


I needed to lower my gears from 4.11 to 3.70.

Should for the EFI make up date.



Breakage Video


http://www.youtube.com/watch?v=RSk_GJKP62s

dam thts crazy but thats the way to go if it breaks should be all the way lol

that is sick! :chug:

Wow. :wave-fing

ha!

Been there.. done that... 5 times...

:(

Thats the way to get it done! I stopped by the shop just in time to get dirty. I need another fbody so much easier to work on.

It sounded just like it looks! :bomb:
Show the video.

You need a BIG Cookie now....See you soon....Frank

Where is the problem;) Wow hpoe that doesn't happen to me knock on wood.I just installed a spool into my 12 bolt.Barry I was going to hang tough and keep the 6spd but im 99 % sure im going to go auto just got to get my car up to the shop so the ideas of ordering anthoner clutch stop eating away at me.That new rear looks sick if you dont mind me asking how much for tharear all set up?

i was curious myself on the final price of one of those bad boys

I think you got your money out of that 12 bolt Barry, lol :jest:
it's been in there what? 9-10 years???
We used to call you Bender, what to call you now? :jest:
You coulda SAVED that rear with a nice A3 but NOOOOOOOOOO!!!!!!!! :nutkick:

I took the video of that pass. It sounded awesome.

Nice work Barry.

Now get an Auto!

Nice damage! lol

We used to call you Bender, what to call you now? :jest:Ya beat me to it, :D I was going to resurrect his old title which hasn't been quite as applicable lately (remember when he used to break something like almost every track visit LOL) as he's been doin' ok the last few years. ;)
I think the 'Bender' name will be retired once again after he gets that new rear in there though. :thumb:

Good job M'ing it up :headbang:

Ditch the M9 and get yourself the Midwest Chassis Fab. 9"

Smashtacular.

Ya beat me to it, :D I was going to resurrect his old title which hasn't been quite as applicable lately (remember when he used to break something like almost every track visit LOL) as he's been doin' ok the last few years. ;)
I think the 'Bender' name will be retired once again after he gets that new rear in there though. :thumb:

Bender was a name when it just bent parts. Im more like Breaker!!

I remember the days that everytime i was at the track i broke. Went on for about 3 years. I did have a good run these pass 2 seasons.

I think you got your money out of that 12 bolt Barry, lol :jest:
it's been in there what? 9-10 years???
We used to call you Bender, what to call you now? :jest:
You coulda SAVED that rear with a nice A3 but NOOOOOOOOOO!!!!!!!! :nutkick:

This is my second 12 bolt.

I busted my diff on my 10 bolt.
1st 12 bolt busted the posi unit. Then the axle flew out on me on the road. T bolts loosened up.

2nd 12 bolt broke the posi and gears. Swapped to spool. Now broke the gears.

So i didnt get that much out of each 12 bolt.

Ditch the M9 and get yourself the Midwest Chassis Fab. 9"


at least look into these. seems like very nice peice

Updated the first post with the video of the break.

Good job, that only happens when you're really going for it :)

As for the nickname, mangler seems suitable :jest:

You'll do that again with the 9 nich too though, it will just take a little more before it happens. Make sure you get a pro gearset, they tend to last/take more of that type of abuse then a street gear does. They're louder, but I think you're past that now.

just get a spool or a locker, the 9in posi's are not strong....i am going on my second one:ripped:

So is this one for sale?

just get a spool or a locker, the 9in posi's are not strong....i am going on my second one:ripped:

A differential in a race car? :gay:
Barry learned that 2 rears ago.

A differential in a race car? :gay:
Barry learned that 2 rears ago.

mine is a street car:angel::drive::devil:

mine is a street car:angel::drive::devil:

I know buddy! Just having fun. The spool really isn't bad with street tires. Phil and P.J both drive their cars regularly on the street with a spool and don't mind them at all. :drive:

I love my spool!!! It is driven every day, k turns, parallel parking, tight u turns. Didnt take long to get used to it. But everyone has their opinions lol.

A spool is cool, only a fool who drools while dropping his tools on a stool after drinking fuel at school would think otherwise. :P :D :lol:

That was really goofy LOL.

I love my spool!!! It is driven every day, k turns, parallel parking, tight u turns. Didnt take long to get used to it. But everyone has their opinions lol.

My broken tru trac acts like a spool, the only annoying thing is tire wear at this point....

VERY NICE MAN... Car sounds BAD ASS

wow, nice work lol