Stereo & Electronics - What wiring to install 10 inch sub and 600w amp

I got a pioneer radio and 4 6.5 pioneer speakers installed last week and today I am picking up a kenwood 10 with subthump box and 600w amp. What guage wire should I use? Does brand make a difference?

4 gauge wire is fine. I would use Kicker or Knukonceptz wire.

4 gauge wire is fine. I would use Kicker or Knukonceptz wire.

Thats huge! I think I used 8ga or 10ga which is plenty. Its still small enough to fit under the carpet and kick panels.

whats the rms rating or how big are the fuses in the amp, 8 is prly fine

Thats huge! I think I used 8ga or 10ga which is plenty. Its still small enough to fit under the carpet and kick panels.

8 or 10 gauge is too small for a 10'' sub, IMO

All depends on the setup for big power amp 8 would be small but 4 on a 600 is probably a little overkill

Better to be overkill than too small;)

i always run a 0 gauge for my system but thats me