non-LSX Parts For Sale - LT4 cam / Delteq Complete system / intake / crank / head bolts (Acworth, GA)

I have some parts from my old LT1 project that I no longer need. All parts are located in Acworth, GA, and do not include shipping. I can ship via USPS flat-rate on some things, UPS or Fedex on the rest.

1. Delteq Complete coil pack conversion system for LT1 (p/n 1013). I had this installed on my LT1 and ran it for a total of 2 minutes, at which time the motor chewed all the bearings. I have since removed it all, torn down and built the motor into a racing engine and have a different ignition setup. Kit includes the harness adapters, coil packs, aluminum mounting plate, wires and instructions. Retail is $695 new, I'll sell for $500. SOLD

2. FelPro Head Bolt kit p/n ES72856, new in box / unopened. Summit sells for $25, I'll sell for $18

3. stock intake, bare, no sensors or injectors or fuel rail: $30

4. stock crank, needs polishing but otherwise good condition: $30

5. stock fuel rail, no injectors / etc.: $25

6. stock lt1 water pump: $10

7. Motive products Power Bleeder Pro P/N 0250: $50

PM me here, or email me at ryan@bilsonassociates.com. Thanks!

What yr is the intake and fuel rail from?

both are from a 1994 Firebird LT1

LT4 camshaft, new / never installed (Acworth, GA)

I have an Edelbrock 2108 for sale. It is brand new, still in the box, never even taken out. It came with the Edelbrock Top End Kit for my LT1-to-LT4 conversion, but since I'm going with twin turbos, I have no need for this cam. When paired with the Edelbrock top-end kit, it's rated for 406hp and 390 lb. ft. when installed in a 355 with 10.5:1 ratio. Summit sells this cam new for $286. I'll sell it for $230 plus the ride.

Here are the specs:
Brand Edelbrock
Manufacturer's Part Number 2108
Part Type Camshafts
Product Line Edelbrock Performer RPM Hydraulic Roller Camshafts
Summit Racing Part Number EDL-2108

Cam Style Hydraulic roller tappet
Basic Operating RPM Range 1,500-5,500
Intake Duration at 050 inch Lift 218
Exhaust Duration at 050 inch Lift 218
Duration at 050 inch Lift 218 int./218 exh.
Advertised Intake Duration 286
Advertised Exhaust Duration 286
Advertised Duration 286 int./286 exh.
Intake Valve Lift with Factory Rocker Arm Ratio 0.525 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio 0.525 in.
Valve Lift with Factory Rocker Arm Ratio 0.525 int./0.525 exh. lift
Lobe Separation (degrees) 112
Intake Valve Lash 0.000 in.
Exhaust Valve Lash 0.000 in.

Here is a link to summit's page with details:
http://www.summitracing.com/parts/EDL-2108/

PM me here, or email me at ryan@bilsonassociates.com if you are interested. Thanks!

Threads merged. Please use only one thread for all items for sale.

Sorry about that, thanks for merging them.

interested in the delteq if u still have it pm me and we will talk or call 304-382-9970 thanks

Delteq is sold

For those that have asked, yes the plug wires are included (shown in the pic, draped over the cardboard box).

Delteq is sold, thanks!