non-LSX Parts For Sale - Complete LT1 motor PART OUT!!!!

Everything MUST GO!!! DONT NEED NONE OF IT for what Im doing. Complete LT1 part out....Some go fast parts and stock parts. Car clocked a 12.97 with this set up prior to the head and intake job in the middle of summer short shifting and with a bad TUNE!!! This was a fast bitch capable of low 12's n/a with proper tune.

Stock parts have ruffly 95,000 miles on em and most performance parts have 4000 or less miles on em.
If u need parts not listed pls let me know..Got just about everything, motor is still in the car at this time so some parts will not be available until engine removal

Buyer Pays ACTUAL Shipping Cost.

GO FAST PARTS

Lunati lifters 3000mi. $150
CC PRO MAG Pushrods 3000mi $75
BBK 52mm TB powdercoated $150
NEWLY Rebuilt LT1 heads w/ gasket match, bowl,runners and 5 angle valve Job w/918 beehive springs. (no flow sheet but was informed that they flowed 246 after work done...typical gasket match only nets 235) $500w/springs and ARP STUDS Only 15 miles on the set since the rebuild.
LT4 Heavy Duty Timing Chain 3000mi $150
2 pcm's one obd1 the other ob2 both with radical tunes $50 a peice
Alternator (powdercoated) $75 shipped
Im sure their is stuff missing Ill add as I remember, all typical stock parts available.

LMK what ya need

thanks
sean

Unsure on some of the prices that are listed...Make me some reasonable offers on this stuff.

Bump it up

They coming off your 97.

Do you have a maf?

any pics pf the stuff? Damn interested in multiple parts.

how many miles on the water pump?

Yes they are all coming off my 97. I do have a MAF that has had the screen removed and some minor shaving on the edges. Its also been powdercoat chrome. Works Great with no problems.

Sorry about not adding pictures to this thread yet...got items in 4 different forums and also in the texas section of this forum for my locals.

Speed...Sorry man JUST SOLD THE PUMP.

Pictures were taken during re-essembly last week. Motor is still together at this time and Im moving so Im pulling parts as sold and payment recieved.
http://pic70.picturetrail.com/VOL1831/11775602/22626011/376176009.jpg
http://pic70.picturetrail.com/VOL1831/11775602/22626011/376176005.jpg
http://pic70.picturetrail.com/VOL1831/11775602/22626011/376175993.jpg
http://pic70.picturetrail.com/VOL1831/11775602/22626011/376175979.jpg
http://pic70.picturetrail.com/VOL1831/11775602/22626011/376175968.jpg
http://pic70.picturetrail.com/VOL1831/11775602/22626011/376175842.jpg
http://pic70.picturetrail.com/VOL1831/11775602/22626011/376299240.jpg


thanks guys

How much for your intake Elbow? Is your heavy duty timing chain LT4 come with sprockets or just chain?

How much for your intake Elbow? Is your heavy duty timing chain LT4 come with sprockets or just chain?

Hows $65 shipped for the elbow? It does have a hole that you will have to plug from where the nitrous nozzle was mounted.

On the Timing Chain Ill throw in all sprockets as well for the price Im asking plus shipping.

Are the Pacesetter LT's coated or anything and what would you take for em shipped to North Vernon, Indiana? I've got a 96z that i threw a rod in and we are swapping the motor. Might as well throw a set of these on there while everything is out. lol

Are the Pacesetter LT's coated or anything and what would you take for em shipped to North Vernon, Indiana? I've got a 96z that i threw a rod in and we are swapping the motor. Might as well throw a set of these on there while everything is out. lol

LT's might be sold already...

TTT list updated if something is missing from original list than its already sold.
I also have more parts that arent listed...Mainly stock parts, power steering pump, Accesory bracket, Powder coated alternator ect.

thanks guys

updated!!!

more pics

Pulley bent a little but charges just fine
http://pic70.picturetrail.com/VOL1831/11775602/22693226/377684247.jpg

more pics

Pulley bent a little but charges just fine
http://pic70.picturetrail.com/VOL1831/11775602/22693226/377684247.jpg

http://pic70.picturetrail.com/VOL1831/11775602/22693226/377684253.jpg

if you still have the opti could you post a picture? i am interested in buying it just want to see it first.
Thanks

if you still have the opti could you post a picture? i am interested in buying it just want to see it first.
Thanks

Ill get one for ya tomorrow.

Is the obd1 pcm for an M6? It's in working condition, as in, not fried?

Thanks

sent pm...

interested in the throttle body willing to do 125.00 shipped.... and what about the valve covers i saw in the pics??? u still have then and what are they.. and how much

Is the obd1 pcm for an M6? It's in working condition, as in, not fried?

Thanks

Yes its for an M6....I has been dynotuned with a fairly radical tune but works fine. However u will have to use ur knock sensor due to me selling my LT4 knock sensor.
LMK

Gixxer PM REPLIED LMK

MAC, The valve covers were already sold to a buddy of mine..They are Canton's and usually about 190 new.

As for the TB I was asking 150 plus shipping but Im willing to do $135 shipped plus 3% paypal. Send me a pm and lmk what u decide.

TTT Updated

hey how muchs for the heads intake manifold cam injectors and is ur pcm tuned for thoose head if so how much for them all

still got the cold air intake?