Florida Classifieds - FS: 3" True Dual Exhaust

System was fabbed for Pace Setter LT Headers, but may fit other applications. Pipe is all 3" from the headers, into X-pipe and then dynomax bullets and turndowns before the rear axel. Ran this setup for a little over 2 years on my Z and I loved it, but have decided to go a different route with the car. Tone is deep and agressive.. the sound clips don't do it justice, but it gives an idea. Exhaust comes with everything shown in the pics, including the hangers.

The shop had to cut one of the pipes right after the header when it was removed, so it will require a weld at that one spot, but everything else is in one piece. There is an exhaust leak in one of the welds that could use a patch before it is installed as well, other than that its ready to go. I didn't have much issue with clearance, but it does sit low with the 3" tubing. There are some minor scrapes, but nothing major as you see in the pics. I'll be repainting the system before it sells.

Located in DeLeon Springs (Deland/Daytona Beach area). Prefer local pick up, but will meet up within reasonable distances. If it comes down to shipping, the exhaust will have to be cut up and buyer pays for all actual shipping costs.

Sound clips and video all on an internally stock LS1 with full bolt-ons. If you need more sound clips, PM me your email and I'll send em to ya, photobucket won't host them.

Asking $175 local pickup.

Video (Tips out the back were just for appearance in the vid, they are not part of the exhaust FS)
http://i102.photobucket.com/albums/m83/Corvettekid82/Z-28/th_IMGP0904-1.jpg (http://s102.photobucket.com/albums/m83/Corvettekid82/Z-28/?action=view&current=IMGP0904-1.flv)

Pics on car
http://i102.photobucket.com/albums/m83/Corvettekid82/Z-28/IMGP0913.jpg

http://i102.photobucket.com/albums/m83/Corvettekid82/Z-28/IMGP0914.jpg

http://i102.photobucket.com/albums/m83/Corvettekid82/Z-28/IMGP0915.jpg

http://i102.photobucket.com/albums/m83/Corvettekid82/Z-28/IMGP0916.jpg

http://i102.photobucket.com/albums/m83/Corvettekid82/Z-28/Duals/IMGP2662.jpg

http://i102.photobucket.com/albums/m83/Corvettekid82/Z-28/Duals/IMGP2664.jpg


Off the car
http://i102.photobucket.com/albums/m83/Corvettekid82/Z-28/Duals/IMG_0213.jpg

http://i102.photobucket.com/albums/m83/Corvettekid82/Z-28/Duals/IMG_0214.jpg

http://i102.photobucket.com/albums/m83/Corvettekid82/Z-28/Duals/IMG_0215.jpg

http://i102.photobucket.com/albums/m83/Corvettekid82/Z-28/Duals/IMG_0216.jpg

http://i102.photobucket.com/albums/m83/Corvettekid82/Z-28/Duals/IMG_0217.jpg

http://i102.photobucket.com/albums/m83/Corvettekid82/Z-28/Duals/IMG_0218.jpg

Painted:
http://i102.photobucket.com/albums/m83/Corvettekid82/Z-28/Duals/IMG_0227.jpg

BUmp for ya MIke, this system sounds awesome in person!
I would buy it, but I live on freakin hill and this would totally snag on the driveway going into the garage, dang it!
Are you lowered??
Wonder if it will clear on my car??

Not lowered at all. Stock height minus the rear springs isolaters. You may snag depending on the type of incline. I never had an issue going over things, it was usually if my suspension was compressed going over a dip in the road at high speeds. Good example is the storm drain in the fast lane of I4 eastbound in downtown Orlando by church street. That would get me every time. Solution - get out of the fast lane lol.

I'm interested in it,just pending on selling my texas speed y pipe

TTT
Lots of interest, but it all involves shipping. Last call for local buyers.