Sponsor Sales & Specials - Harland Sharp roller rockers in stock

Just wanted to let everyone know after a few weeks of backorders they are back on the shelves and ready to ship. If you are looking for them in a hurry we have them ready and waiting.

1.7 or 1.8 Retail $349.99
LS1Tech members $320.00

Nate :cool:

Nate,

If I go with the 1.8s, should I pick up some hp as well as making my motor "safer"? And if I plan to install a nice cam & head combo later, would that probably mean I'd have to replace the 1.8s if I went that way? Also, do you recommend replacing the pushrods too (with a stock cam)? I'm looking at these not only for drag racing, but for a 100 mile open road race next year (125mph bracket).

Thanks
Mark

Good price Nate how long is the LS1Tech memeber price going to be like that??
Kyle

Nate,

If I go with the 1.8s, should I pick up some hp as well as making my motor "safer"? And if I plan to install a nice cam & head combo later, would that probably mean I'd have to replace the 1.8s if I went that way? Also, do you recommend replacing the pushrods too (with a stock cam)? I'm looking at these not only for drag racing, but for a 100 mile open road race next year (125mph bracket).

Thanks
Mark

The 1.8`s will increase the HP some by making the cam lift and Durations slightly larger. If you are going to do a heads and cam combo later I would use 1.7 ratio with that and build the lift into the cam and not have the extra strain on the valvetrain. I have another customer that is using these for the same open road races. Iwould also replace the pushrods they are a week link in the LS1`s. If you are going with the the 1.8`s on a stock motor to be safe I would upgrade the springs as well.

Kyle that is my everyday price for you guys. I try to help out where I can.

Thanks Nate

Thanks Nate!

Yes, I know....my buddy Boyce got a set from you. Springs too eh? I was figuring on those for the cam for higher rpms, but I see the logic for higher lift. I was hoping to go cheap for 2 years until I replaced the heads / cam. Sigh. So do you sell pushrods? If so, how much would it be for them & the rockers? Are they in stock and what brand are the pushrods?

Mark

I can get you Manley or Comp Cams. Manley $110.00 or the Comps $125.00. I would do the springs for the open road chalenges anyway with the car sustaining the high revs.

Nate

This year I will only do some drag racing. The open road will come next year. The problem is I have blown past my mod budget for the year, but my valve train makes me nervous now with ~450 flyhweel hp. I think I can force the rockers & pushrods onto the national debt, but once you talk springs, then you might just as well get titanium retainers & keepers.....maybe even new studs. And I just can't swing all that now. Since I have my shift points set @ 6k, and the rev limiter set at 6190, do you think I can live thru 1 season with the stock springs & the 1.8s? (no warranty implied ;) )

I think it would be alright it would be the high revs I would worry about. It is more of an issue with a 6 speed missing shifts. Just don`t want to see any valve float.

Nate

Valve float with those would be bad, but I haven't missed a shift in my car yet! :jest:

Do you know what the specs are on the stock cam?

Nate,

I don't see a way to order these on your website. Should I call you, or email you?

Mark

Stock cams are about 215-218 at 500-520 lift on a 115.

Ya we are working on the online ordering. You can order either way. I can take the call or e-mail me all the info shipping address billing and CC info.

Nate

When are the adjustables due out? Any pricing info on those?

:cheers:

Chris we changed directions with them we are trying to get a set to fit under the stock valve covers. We have a set working in testing so I don`t think it will be too long. Just want to be absolute sure we have no problems.

Nate

Nate,
how much total cost shipped to 31833??
you can email me at engineertelco@yahoo.com if you would prefer.

Thanks, Pete

You have mail Nate

Killer you have mail.

Got it Mark

Thanks Guys

Have plenty in stock for you guys.

Nate

Chris we changed directions with them we are trying to get a set to fit under the stock valve covers. We have a set working in testing so I don`t think it will be too long. Just want to be absolute sure we have no problems.

Nate

Any news on the adjustables?

We changed directions with them we are trying to get a set to fit under the stock valve covers. We have a set working in testing so I don`t think it will be too long. Just want to be absolute sure we have no problems. Well what we had is not going to be good enough for what we need so we are trying some new things. It is just a little hectic and time is always an issue. We are working on it and hope to have something soon but I am not sure exactly when it will be perfect. Sorry for the delay on these but we want to get you the best product we can.

Thanks Nate

Hey Nate,

I got the PO from you, but I never saw a ship date or anything. Can you give me an idea if / when these shipped or might arrive? Thanks!

Mark

You should be getting it any day. I will see about getting you a tracking #.

Nate

Just wanted to let everyone know after a few weeks of backorders they are back on the shelves and ready to ship. If you are looking for them in a hurry we have them ready and waiting.

1.7 or 1.8 Retail $349.99
LS1Tech members $320.00

Nate :cool:
Nate,
I would like set 1.7 please, can I pay pal you the money? You might have to start giving Boyce a cut on these he was the one that turned me on to it. I will not be Open Roading this car.
Send email jeffyvette@aol.com for shipping info It will be going to 83706 Zip to figure shipping.
Thanks,
Jeffy'

You got mail

Any word on my tracking # Nate? Sorry to be a pest, but I don't want Boyce to show up Friday & drink all my beer if the parts aren't going to be there. :chug: I got the pushrods today....

nate - I would like to purchase the 1.7 Harland Sharp RR's for my 98 LS1 camaro. Please email me at z28ryder@hotmail.com with info on how to pay via paypal! Thanks! :)

I will call them first thing in the Am to see what the hold up is. I did not have any 1.8`s left so I had them drop ship them to you.

Sorry for the wait.

Nate

Nate - the Big Brown Truck came LATE last night. I got em....they are SWEET! Thanks man.....Mark

Good to hear.

Thanks Nate

Nate,

Are the Yella Terra instructions on LS1HowTo.com good enough for doing the HS rockers, or do I need specifics?

Mark

That is a good instruction they setup the same.

Nate

OK. Thanks bud!

Nate,

Your instructions are MUCH better than LS1HowTo's are. Found out I needed shims. The .050 washers worked fine. But then I had valve cover clearance issues (so it still did not run). Got that issue worked via the hammer & dremel tool, and it runs fine now.

Just took it for a test drive & it rpms quicker, and pulls harder too. Problem is the valves float at 5500 rpm in 2nd gear, so you were right, I need new springs to make these work. Damnit! But they did seem to improve my air/fuel ratio. My ltfts were 0 at idle & positive at cruise. Now they are -7 at idle & -1.5 at cruise. Interesting!

That is good to here you got it working. But also sucks you need new springs. The modding never ends....

Nate

I just got in some more of these. It is getting harder to keep these in stock last time I had 10 they were gone in 2 days.

Thanks Guys have a great weekend.
Nate