Stereo & Electronics - Tone after power down stereo




View Full Version : Tone after power down stereo


sfortner
04-21-2004, 01:24 AM
(In the TA with the 500W Monsoon)

I bought a replacement component set of speakers for the front 6.5/TW. They are MB Quart. I installed one side. Everything seems to be fine, except when I power off the stereo, the 6.4 starts this continuous high tone. To get it to stop, I had to pull the output for that speaker from the crossover. As soon as I break the circuit, I hear a click from the back of the car, seems like it is coming from the stock amp. Any suggestions?