1QuickT-A
02-07-2005, 07:43 PM
I've got a 1995 Trans Am that I have been working on swapping in a SBC engine.. I am right in the middle of this project and I am thinking about going a different direction.. Here is a little info about the car..
95 Trans Am w/ T-Tops - No Motor or Trans
White exterior with black leather interior
Was originally a LT1 6-spd car
Factory front end & 10-bolt still under car
Factory Chrome 16in 5-Star Wheels
Body is in GREAT condition with only minor scratches!
Engine has been removed as well as engine wiring harness, computer, transmission, exhaust, EFI fuel lines & ABS block.. This car is ready for a SBC conversion! I have also bought alot of HIGH DOLLAR parts that are needed for the SBC conversion. I have a Barry Grant 400 gph fuel pump, Barry Grant 4-Port Regulator, Barry Grant Fuel Filter, MSD Crank Trigger, MSD Low-Profile Distributor for Crank Trigger Setup, MSD Digital 6 Ignition box w/Timing Retard, Built-in 2-Step and Rev Limiter, Taylor 8mm Wires, MSD HVCII Coil, Edelbrock 100-250 Nitrous Plate Kit, Moroso electric water pump and an Edelbrock Super Victor intake. ALL OF THESE PARTS ARE BRAND NEW IN THE BOXES!!!!!! EVERY SINGLE PART!! I've also got a SBC 350 block fully machined with a 383 3.750 Stroker crank in it. Just needs pistons and rods. I will throw it in for a nice price as well.
I am asking $2200 for the car itself.. And IF these parts are also wanted I can come up with a price for them as well and make a nice deal on the whole package together! The parts alone add up to over $2400 dollars and that doesn't count taxes and/or shipping costs.
I am 90% sure that I will be selling this stuff.. I will be 100% sure in 1-2 days! If you have any questions please feel free to ask!
Thanks,
Matt
95 Trans Am w/ T-Tops - No Motor or Trans
White exterior with black leather interior
Was originally a LT1 6-spd car
Factory front end & 10-bolt still under car
Factory Chrome 16in 5-Star Wheels
Body is in GREAT condition with only minor scratches!
Engine has been removed as well as engine wiring harness, computer, transmission, exhaust, EFI fuel lines & ABS block.. This car is ready for a SBC conversion! I have also bought alot of HIGH DOLLAR parts that are needed for the SBC conversion. I have a Barry Grant 400 gph fuel pump, Barry Grant 4-Port Regulator, Barry Grant Fuel Filter, MSD Crank Trigger, MSD Low-Profile Distributor for Crank Trigger Setup, MSD Digital 6 Ignition box w/Timing Retard, Built-in 2-Step and Rev Limiter, Taylor 8mm Wires, MSD HVCII Coil, Edelbrock 100-250 Nitrous Plate Kit, Moroso electric water pump and an Edelbrock Super Victor intake. ALL OF THESE PARTS ARE BRAND NEW IN THE BOXES!!!!!! EVERY SINGLE PART!! I've also got a SBC 350 block fully machined with a 383 3.750 Stroker crank in it. Just needs pistons and rods. I will throw it in for a nice price as well.
I am asking $2200 for the car itself.. And IF these parts are also wanted I can come up with a price for them as well and make a nice deal on the whole package together! The parts alone add up to over $2400 dollars and that doesn't count taxes and/or shipping costs.
I am 90% sure that I will be selling this stuff.. I will be 100% sure in 1-2 days! If you have any questions please feel free to ask!
Thanks,
Matt