Small Block & Big Block Chevy Specific - 396 / 427 parts

Does anyone have a steel crank for 396/427? Also looking for two TRW L2287 .030 pistons.

What else do you have for sale of the "small" bbc's?

theres a guy that has a bunch of NOS gm factory steel cranks sells them around 300 bucks Shaw city engines 559 275 2001 ask for allen he sells them alot on ebay

I'll have to give him a call... thanks for the info!

Who else has small bbc parts!

L-88/zl-1 heads, $1100
ported/polished/decked/x-rayed
back from the shop / still in the boxes

some stuff laying around....

new Cowl induction air cleaner setup.

BB starter w/ heatshield

crome cheep valve covers

stock damper

big hooker headers / ceramic coated - for 2nd gen f-body
some dents/ brand new only used for mok-up

TTSSZ

Do you know the casting number on the heads or if they're open or closed chamber. any repair work done. Where are you located?

Im in northern N.J.

Aluminum Open Chamber…3946074 114.8cc 2.19 intake / 1.88 exhaust
Came on 69 430hp 427 / 70 465hp 454 / 71 425hp 454
HI-PERF / winters snow flake stamped.
GM aftermarket heads - D-shaped exhaust ports
I bought them for $1100 with one small valve guide repair / paid $600 to have them decked and pressure checked and x-rayed. Came out 100%
Mint condition sq. port heads, ported and polished
Comes w/ k-motion stainless valves & 615 lift springs / titanium retainers
And hd guides.
Still in the boxes from the head shop.

I have a "1966" 427-425 horse power 4 bolt main block, .030 over and will stay that way. I am in north texas, reply if interested. Where are you located?

I have :
a complete (minus carb)71 300hp/402 w thm 400 was running when pulled
almost complete 454, was running when pulled, but needed rebuilt
454 short block, think it has a spun rod bearing
68 396 block and crank

I'm thinking of going the LS route.
I'm in SW Mississippi
Virgil

I've got a forged 427 crank that came out of my '72 tall deck. The journals look good, but I guess it could be turned if you really wanted to.

It's bagged and oiled in a corner somewhere. Let me know if you're interested.

Jim