Small Block & Big Block Chevy Specific - is this combo good?help

im buying 87 Iroc-Z with these mods and i want to know if its good or not

it has :
350 overbored to 0.30
edelbroke intake manifold(i dont know if its performer or pefromer R.P.M)
700cfm holley
headers(i dont know if its long tube or small tube cuz i still didnt check)
accel 8mm wires
balancer
hooker muffler
MSD 6A i guess
converted from auto to manual T-5

i still dont know much about the car but what do u think guys

is it a good combo or i need a new set up?

here is some pics of it

http://www.ls1tech.com/forums/attachment.php?attachmentid=50934&stc=1

http://www.ls1tech.com/forums/attachment.php?attachmentid=50935&stc=1

http://www.ls1tech.com/forums/attachment.php?attachmentid=50936&stc=1

http://www.ls1tech.com/forums/attachment.php?attachmentid=50937&stc=1

http://www.ls1tech.com/forums/attachment.php?attachmentid=50938&stc=1

so i need help guys

i will get more info's about the car and give me some Q's to ask the owner

Sounds like a pretty good set-up for a street car. The big questions are going to be about cyclinder heads and valve train (camshaft specs), and compression ratio, as a 350 is a 350 is a 350. Most of the power comes from those things. They will also help in determining the "drivability" of the car, as far as everyday use is concerned. Looking at the headers (1 5/8) primary tubes and the fact that it has an electric choke carb. I would guess on 1.94 intake valves and probrobly no bigger than a 280 duration .480 lift cam, as anything bigger would require larger headers and a more performance oriented carb. Check on those things, as compression will determine if you can run it on pump gas without retarding the timing to far. Where do you live, as I doubt this car would pass an emissions test, if that is a concern in your area.

thank u very much sir

but it has a stock heads and valve train

about the headers i asked him and he told me its a hooker and he was confused about it so he dont know

i will buy the car and i will do some search's on these parts

im thinking of rough ideal cam

what do u think?

Nice looking car. Somebody really did some retrofitting with the front accessories. Looks like they used the serpentine belt but with some old school mounts. How much is he asking?

yeah its a good looking car

he is asking for 1000BD(bahrain dinar)

thats mean around 2600$

we got more cheaper around here but it needs interior with a lil exterior work around 1000$