Stereo & Electronics - Need help installing pac swi-jack lol

Anyone who has installed this before in our cars please help! The instructions are so confusing, if anyone can list step by step in idiot proof terms on how to set this up with my alpine 9883 headunit it would be greatly appreciated. Thanks

Have you tried a search? This has been discussed in great length on this site, so there is plenty of info on here about installing that unit. Good luck!

I did search and Only found about 3results, which didnt seem to help much and talk directly about the swi jack not the swi x

Interesting. I typed in Pac SWI-X in the search feature within this forum and 7 pages worth of info came up.

THIS ISNT PAC SWI X for the 3rd time..

I need specific information on installing the pac swi-jack with this alpine headunit in my trans am, don't be a smartass.

Well, not trying to be sarcastic, just trying to help you with the search feature. I see that I misread what you had posted. You want info for the wired remote setup. See that now, however, I`m out of this thread. Was going to help you, but....

ok bye then, you wanted to be a ass about something I already checked, I'm on here more then you and am not a idiot when it comes to using a search button you don't need to tell me idiot proof things then come back and still try to act like mr. smartass here when your STILL not reading what I was asking right anyways.

Sorry dude

swijack should wire in basically teh same as swix

still looking for help from anyone who knows this thing

Penta is right. It wires up to the car exactly like the SWI-X.. only difference is you plug the little plug into the back of the head unit, and then follow the programming instructions that same with the JACK.

It's 3 wires and a plug.

12v switched, ground, and the wire coming from the steering wheel controls, which I'm sure you've already found in the searches on the SWI-X.

yeah. You take some blue wire from your old harness and splice it with, I believe the GREEN wire of the PAC. So black, red, and green. You don't need any of the others. Then just plug in the minijack into the headunit, and you're good.

Programming is a little confusing, just make sure you HOLD the button until the light goes out. I just pressed it once and when I was all done, one tap of the volume up button made the headunit go to full volume.