Small Block & Big Block Chevy Specific - long tube headers for 82 camaro w/ 350

Ok so here is my delima. I have a 1982 camaro with a built chevy 350 from an unkown vehicle. All i know is the heads which the part# is 3973370 which refrences as a 69-70 z-28 replacement cylindar head. So do I purchase a set of headers for a 68-81 camaro with a 350 or do I need a set of headers for a 82 camaro.
I was looking at theses headers from Summit but there for a pre 82 but it will fit the heads.
http://store.summitracing.com/partdetail.asp?autofilter=1&part=SUM%2DG9001%2D9&N=700+4294923429+4294839039+4294908216+4294908198+ 4294918680+4294840140+4294925046+115&autoview=sku

Thanks

Get them for an 82. All headers until 98 (LS1) use the SBC exahust pattern in the F-Body. It looks like this: o oo o

Therefore, you need headers that fit the body, not the SBC (since the SBC is always the same, even the 400s). Even the LT1 uses the conventional SBC exhaust pattern. It's once you go to the LS1, that it looks like this: o o o o

Yep, buy whatever brand you want as long as it is for a 3rd gen 82-92.

I got mine from Hedman and still I didnt install them lol

i have the cheap hedman full length on mine. no clearance issues. saving up for a better pair though.

Full lengths required me to make a coupe of modifications to the A arm mounts.

Full lengths required me to make a coupe of modifications to the A arm mounts.

that sucks, i didn't have any issues there. i did though notch/channel part of my subframe to keep the duals tucked up in nice.

My sub frames are CE, what kind are yours? Mine are out of the way.

My sub frames are CE, what kind are yours? Mine are out of the way.

Sorry i meant the actuall front subframe that runs along near the tranny. i cut them out and boxed them in. my exhaust is tucked up snugg against the floor. i to have CE frame connectors.

OK, i was like,"WTF?". My hookers required me to cut both sides.

i'll have to post some pics after i get her back together. i'm getting it ready for paint.

I just ordered a set of flowtech full length longtube headers. They stated that they are custom made for my application, and that they fit like stock. I let you guys now how they fit when i recieve my new dart iron eagle platinum heads.

BWAH!!! What the hell size are those pieces of junk? That has to be the worst header available i thought? 1 1/2 primarys i have seen last, on a set of real heads? You must not want peak power.

My hookers fell right in place.

http://s259.photobucket.com/albums/hh296/shadetree1/?action=view&current=IMG_0140.jpg
IMG_0140.jpg - Image - Photobucket - Video and Image Hosting
HERE IS A LINK TO PIC.

I also heard that new or solid motor mounts helps the fitment too. Looks great man, verry clean.

http://i157.photobucket.com/albums/t74/ZONES89RS/Picture157.jpg

omg i didnt see that when i ordered them. i guess i better send them back. I cant believe they even manufacure a long tube header with 1 1/2 inch primaries.

Thanks zone and yes I have moroso solid mounts. Wish I had a better picture of the headers in the car I will have to search around. Zone yours looks good to.

Man, mine looks OK, your is just awesome. I can say mine looks good for a half ass job. You look like you have some real time in that thing.

Yea I have spent a little time on it LOL. I have owned it since 1994 and built 5 motor combos and lots of trannys.

Damn, i have owned mine since06 and am having issues with the 4th engine. I am going with a stock L98 carbed till i get the current engine fixed.

another question since i just sent back my flowtech headers. My dart heads have a square exhaust port, and i was looking on summit and i couldnt find and square port headers. Will oval or d port style work with these?? Also hedman only makes headers for angle plugs, but my heads have a straight plug will they still work??

Thanks
Ryan

Yes thay will work. And the stright plug heads are not a proublem.

awsome thankyou very much!

If you have straight plug heads, you might need a special spark plug to fit. They are shorter and quite a bit more expensive but I am not sure what they are called.

My hooker supercomp headers are square port.

If you have straight plug heads, you might need a special spark plug to fit. They are shorter and quite a bit more expensive but I am not sure what they are called.

i have the accels 276S in my motor. they are a shorty plug. there like $3.00 a piece. work great.