Racmath
06-30-2008, 05:51 PM
What do I need to put a set of 305 Vortec heads on a 350 block
Small Block & Big Block Chevy Specific - 350
View Full Version : 350
slvr98camaro
06-30-2008, 11:58 PM
im assuming this is on a gen1 SBC, so you would need a new intake, gaskets (intake/head) for sure
if you are using the old valve covers you are going to need to buy new ones since the vortecs are center bolt
if you are using the old valve covers you are going to need to buy new ones since the vortecs are center bolt
1BadElky
07-02-2008, 12:16 AM
intake gasket
head gaskets
exhaust gaskets
LS1
wrenches
sockets
LS1
new plugs probably
LS1
either the FI vortec intake, or an aftermarket intake designed to use a carb with Vortec heads.
centerbolt valve covers
:D
head gaskets
exhaust gaskets
LS1
wrenches
sockets
LS1
new plugs probably
LS1
either the FI vortec intake, or an aftermarket intake designed to use a carb with Vortec heads.
centerbolt valve covers
:D