Hello all i installed a Peripheral Technology's Media Gateway GXAMG...
it was very easy. i personly dirilled a hole in the back on the lower storage bin of the center consol for the Ipod/mp3. used velcro to hide unit and wires.
Word? I think someone else had bought something similar and found it didn't work with 08's. Well good shit on finding something that does. Guess it doesn't matter since I got my avic now lol. SD card dumdumdum.
__________________ 2008 Ivory White Grand Prix GXP - !resonator | Catless Hogan DP | Cutout | AVIC F900 --- 13.9 @ 104 w/2.2 60'
1995 PGM Z28 M6 - LM7 swap project under way
can you post a link as to where to buy this. I had purchased one from logjam electronics and it doesn't support 2008 gxp's I basically threw away 130$
__________________ 2008 Grand Prix GXP: Fully Loaded
Magnaflow Exhaust, Hogan Downpipe /w highflow cat, zzp shift kit, flipped mount, k&n aircharger, Tuned, Airaid TBS, 180* thermo, Ported TB, Intake Manifold and exhaust Manifolds, DEI wrap on manis and crossover, HS 1.8 rockers, Comp oil restrictive push rods, PAC 918 Springs, Cryogenicly frozen rotors from R1concepts, front and back STB's, Royal purple oil and filter.
Damn man. Circuit City is going out of bussinesss. Thats were i picked mine up at. On the box it said it only supported 07 Grand prix, but on the inside it had a paper list that included the 08 models. i think ineed to update my ipod for the full controls of the ipod using the radio. The link for the company http://www.peripheralelectronics.com...ts.aspx?q=NULL The kit is called PXAMG and will come with 2 different wire harnesses. PGHGM5 and PGHGM1, the one for my grand prix(NON NAV) was the PGHGM5. It was basically plug and play. There website kinda sucks.
Lol i actuallly installed it in the parking lot, then whent home and did a good install of hiding the wires and such.
__________________ 2008 Grand Prix GXP: Fully Loaded
Magnaflow Exhaust, Hogan Downpipe /w highflow cat, zzp shift kit, flipped mount, k&n aircharger, Tuned, Airaid TBS, 180* thermo, Ported TB, Intake Manifold and exhaust Manifolds, DEI wrap on manis and crossover, HS 1.8 rockers, Comp oil restrictive push rods, PAC 918 Springs, Cryogenicly frozen rotors from R1concepts, front and back STB's, Royal purple oil and filter.
awsome i am gunna swing over to them tonight hopefully they have one.
__________________ 2008 Grand Prix GXP: Fully Loaded
Magnaflow Exhaust, Hogan Downpipe /w highflow cat, zzp shift kit, flipped mount, k&n aircharger, Tuned, Airaid TBS, 180* thermo, Ported TB, Intake Manifold and exhaust Manifolds, DEI wrap on manis and crossover, HS 1.8 rockers, Comp oil restrictive push rods, PAC 918 Springs, Cryogenicly frozen rotors from R1concepts, front and back STB's, Royal purple oil and filter.
__________________ 2008 Grand Prix GXP: Fully Loaded
Magnaflow Exhaust, Hogan Downpipe /w highflow cat, zzp shift kit, flipped mount, k&n aircharger, Tuned, Airaid TBS, 180* thermo, Ported TB, Intake Manifold and exhaust Manifolds, DEI wrap on manis and crossover, HS 1.8 rockers, Comp oil restrictive push rods, PAC 918 Springs, Cryogenicly frozen rotors from R1concepts, front and back STB's, Royal purple oil and filter.
The basic of my install.....
I ran the lead for the box down the drivers side, of the cent consol down to where the HVAC controls are. then ran the wire across to the passenger side where the HVAC wiring going. I used Velcro to attach the control box for the MP3 addapter up out of the way. I removed the storage bin and drilled a hole in the back corner of it . There was alot of extra wires so i ran them inside the center stack up out of the way. left about 3ft of leads so that i could hold the MP3/Ipod while driving. Ill take pics and hopefully that will make more sense
__________________ 2008 Grand Prix GXP: Fully Loaded
Magnaflow Exhaust, Hogan Downpipe /w highflow cat, zzp shift kit, flipped mount, k&n aircharger, Tuned, Airaid TBS, 180* thermo, Ported TB, Intake Manifold and exhaust Manifolds, DEI wrap on manis and crossover, HS 1.8 rockers, Comp oil restrictive push rods, PAC 918 Springs, Cryogenicly frozen rotors from R1concepts, front and back STB's, Royal purple oil and filter.
Tried posting up my color drawings lol. Too big if u want them i can Email them to you just PM. me Basically i just put the control box right near the the corner of the center of center consol/glove box, feel up behind there and you will feel a good empty spot to put it.
IPOD>MP3 addapter 
