 2008 LY6 6.0, 20k miles, L92s w/ cam, LS3 conversion, VVT delete, TURN KEY READY SWAP
Selling my motor i built for my chevelle. No time to play with car for a while! The motor is as follows....
2008 LY6 6.0 engine, originally from 2008 silverado 2500HD
Has L92-LS3 heads stock, motor has only 20k miles
Here are the mods....
VVT delete, LS3 chain, front cover, cam drive and pickup installed
218-224 @ .050 Cam, 114LSA, .550 .550 lift
.080 wall comp pushrods, GM LS6 valvesprings
90MM corvette LS3 throttle body
Engine is complete intake to pan, with all sensors, coil packs, accessories (alternator, starter, PS Pump and water pump)
Ready to bolt in and Go....$3200
I have the following parts to go with it, if interested....
60LB injectors (new in box) $200
Stand Alone Harness $600 ...set up for the following
*2 wire hookup, dual fan relays and fuel pump relay installed, Drive by wire, 4l80E transmission, 2 oxygen sensors, Evap delete, all other factory sensors applicable. 5' length to bulkhead of harness, made custom by FUEL INJECTION CONNECTION out of Colorado
Matching flash tuned PCM to run this combo $250
Flash tuned for cam / head combo. Set up for Vats Delete, rear 02 delete, Trans of your choice, gears of your choice, tire size of your choice, converter of your choice
2007 4L80E Transmission w/ converter 28k miles, still attached to pallet with all paperwork from salvage yard $900
Truck idler pulley relocation kit w/ belt (for running ls3 intake) $130
Your choice of LH8 or CTSV Pan installed on motor (i have both)
$160 for LH8
$200 for CTSV
I have everything needed for a turn key swap into a muscle car, 4th Gen, or ?????
Serious people only please. Thanks! JH | 
