Big Cube Dart LTX, want it, get in here ASAP!!!
04-11-2009, 12:47 PM
#1
Big Cube Dart LTX, want it, get in here ASAP!!! For those following this post..... https://ls1tech.com/forums/lt1-lt4-m...lt1-block.html
If you want it, Dart needs to hear from you. On their forum, they now have a topic and poll. http://www.dartheads.com/dartboard/showthread.php?t=930 If you have a LTX and even if you don't plan building one now, this is huge news for us. My block I had is already dropped off to be shipped to Dart for measurements as well as the front cover. Please pass this information on to anyone that you know has an LT engine. The more response to this, the faster it will be made. We are really close to this and we can all thank my engine builder Jerry Clayton for getting this to this point. It is all up to you guys now. This is not a bench racing idea anymore, it is now a reality. Thanks.
If you want it, Dart needs to hear from you. On their forum, they now have a topic and poll. http://www.dartheads.com/dartboard/showthread.php?t=930 If you have a LTX and even if you don't plan building one now, this is huge news for us. My block I had is already dropped off to be shipped to Dart for measurements as well as the front cover. Please pass this information on to anyone that you know has an LT engine. The more response to this, the faster it will be made. We are really close to this and we can all thank my engine builder Jerry Clayton for getting this to this point. It is all up to you guys now. This is not a bench racing idea anymore, it is now a reality. Thanks.
04-11-2009, 01:18 PM
#2
voted!
Even if you have no use for one right now, think about a year or two down the road. Do you want to send your 350 out to the machine shop to drop $1000-$1400 on a 383/396 which is maxed out, or do you want to purchase a brand new block that is 420+ cubes, substantially stronger, and has a lot of room to grow?
Only takes a minute to register and vote.
Even if you have no use for one right now, think about a year or two down the road. Do you want to send your 350 out to the machine shop to drop $1000-$1400 on a 383/396 which is maxed out, or do you want to purchase a brand new block that is 420+ cubes, substantially stronger, and has a lot of room to grow?
Only takes a minute to register and vote.
Trending Topics
04-11-2009, 08:39 PM
#9
Voted.
Even if I do not need one now, it would be considered in a future build. I'm thinking a future build something like a forged 427 hydraulic roller LTX with hand ported AFR 220s and a fairly large hairdryer hanging off the front...only because I doubt funds would allow twins
.
You know, just another 900+hp street car
.
Even if I do not need one now, it would be considered in a future build. I'm thinking a future build something like a forged 427 hydraulic roller LTX with hand ported AFR 220s and a fairly large hairdryer hanging off the front...only because I doubt funds would allow twins
.You know, just another 900+hp street car
. 
04-19-2009, 09:19 PM
#17
