 | 
08-19-2006, 12:58 PM
|
#1 | | Teching In
Join Date: Dec 2004 Location: salinas
Posts: 26
|  what the f$$k is up w/ ram hd
just installed a ram hd clutch and slave and from the moment i drove off w/the car it was slipping. Is this common w/ram hd ?. Did they installe it wrong ? any help would be greatly appreciated.
__________________
00SS BLACK ON BLACK T TOPS M6
F13 230"/232" 595" / 585" on 112LSA
PRC STAGE 2.5 5.3L 2.04"/1.585"
SVO 30# INJECTORS, LS6 PORTED OIL ,HOOKER OFF ROAD Y PIPE AND HEADERS,LID,RAM AIR,PORTED TB LS6 INTAKE | 
|  | |
08-19-2006, 01:23 PM
|
#2 | | Teching In
Join Date: Dec 2004 Location: salinas
Posts: 26
|
Do I Also Need To Shim It.... Can Someone Tell Me What Shimming Means
__________________
00SS BLACK ON BLACK T TOPS M6
F13 230"/232" 595" / 585" on 112LSA
PRC STAGE 2.5 5.3L 2.04"/1.585"
SVO 30# INJECTORS, LS6 PORTED OIL ,HOOKER OFF ROAD Y PIPE AND HEADERS,LID,RAM AIR,PORTED TB LS6 INTAKE | |
| | |
08-19-2006, 03:24 PM
|
#3 | | Teching In
Join Date: Dec 2004 Location: salinas
Posts: 26
|
Can Some One Help It Grinds Super Hard When I Try To Put In Reverse Help!!!
__________________
00SS BLACK ON BLACK T TOPS M6
F13 230"/232" 595" / 585" on 112LSA
PRC STAGE 2.5 5.3L 2.04"/1.585"
SVO 30# INJECTORS, LS6 PORTED OIL ,HOOKER OFF ROAD Y PIPE AND HEADERS,LID,RAM AIR,PORTED TB LS6 INTAKE | |
| | |
08-19-2006, 06:15 PM
|
#4 | | TECH Fanatic
Join Date: Sep 2005 Location: DFW
Posts: 1,372
|
you should have gotten a shim that goes behind the slave, also did you resurface your Flywheel you might need a shim for that also. and no it should not slip at all. mine doesnt like to slip when i engauge it. it just grabs 
__________________
1999 NBM Z28 M6 | |
| | |
08-19-2006, 07:44 PM
|
#5 | | 10 Second Club
Join Date: Oct 2002 Location: Waterloo, Ontario
Posts: 2,070
|
You need the shim-if not get an adjustable master.
__________________ HOME OF CANADA'S FASTEST STREET DRIVEN C5's.
FI Specialists, TTix, Procharger, Paxton, Vortech
TTix C5-9.7@152-pump gas
Procharger C5 9.67@146 pump gas WWW.CDNPERF.COM
1-416-751-8047 | 
| | |
08-21-2006, 05:32 PM
|
#6 | | TECH Regular
Join Date: Jul 2005 Location: Lake St. Louis, MO
Posts: 464
|
mine doesnt slip at ALL. Everytime i take off, it wants to chatter, or break the tires loose. Im just now getting used to it. I have 150 miles on it, and love it. I can almost take off smooth if i about dump it at 1700-2500 rpm. It sucks in slow moving stop and go traffic though  | |
| | |
08-21-2006, 09:40 PM
|
#7 | | TECH Junkie
Join Date: Mar 2002 Location: East Brady, Pa
Posts: 3,400
|
I have one with a shim behind the slave and it doesn't seem like it's fully disengaging. Do I need to shim the pressure plate? If so how much?
__________________
1998 Black SS Camaro #1262
Under construction | |
| | |
08-21-2006, 09:59 PM
|
#8 | | TECH Fanatic
Join Date: Sep 2005 Location: DFW
Posts: 1,372
|
did you resurface your old flywheel or use a new one? if you resurfaced one you need to know how much was taken off?
__________________
1999 NBM Z28 M6 | |
| | |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off | | |
| |  |
