Put a 28" tall tire on your car Josh, BEST thing we ever did to Mikes car. You have alot more power to boot. What is your rear suspension setup anyways?
It has/had a 28 on it at the Shootout (pic in my sig). I still can't leave very hard because of the clutch and stock tranny. Once I get a few more passes in I plan on leaving harder, but not until I get to enjoy it a little bit.
I have full chromeoly rod-ended Joe Barszcz Racecraft rear suspension (LCA's, Panhard bar, and chassis-mounted TQ arm). It seems to work well, but it's not tested to it's fullest yet.
Scott just asked me when I was leaving for Muncie so I thought I would post this up so if anyone wants to caravan we can
Mike Voelker, Scott Massey , Joe Haines (JPH),Kurt and Myself are all planning on going. We are planning on leaving Fort Wayne at 4:00pm so if you wanna follow post it up
We are all hoping to set new best so it should be a good time.
Jcatts what time are you leaving ?
4:00 works for me! Pick a spot to meet and I'll be there. DA has been killer the past few days and I'm going to shed some weight as well
It has/had a 28 on it at the Shootout (pic in my sig). I still can't leave very hard because of the clutch and stock tranny. Once I get a few more passes in I plan on leaving harder, but not until I get to enjoy it a little bit.
I have full chromeoly rod-ended Joe Barszcz Racecraft rear suspension (LCA's, Panhard bar, and chassis-mounted TQ arm). It seems to work well, but it's not tested to it's fullest yet.
Scott just asked me when I was leaving for Muncie so I thought I would post this up so if anyone wants to caravan we can
Mike Voelker, Scott Massey , Joe Haines (JPH),Kurt and Myself are all planning on going. We are planning on leaving Fort Wayne at 4:00pm so if you wanna follow post it up
We are all hoping to set new best so it should be a good time.
4:00 works for me! Pick a spot to meet and I'll be there. DA has been killer the past few days and I'm going to shed some weight as well
Scott suggested Arbys at coldwater and washington. I'll probably just call Scott when we are about to round the corner since we will be trailering Mikes car. Then you guys can just pull in behind us or whatever.
__________________
1995 PONTIAC TRANS AM LT4 AFR HEADS, GM847 CAM, CORSA CATBACK, KOOKS HEADERS
2002 PONTIAC TRANS AM NASTY/JPH CUSTOM CRANE CAM, CORSA CATBACK, ARH HEADERS, YANK 11.69 @ 122.05 w/ 1.68 60ft - 402RWHP Cam Only
Luke, your car looks hilarious on the "pizza cutters".
__________________ 1988 Mazda RX7 - Forged 347" LS1/T56 - Wiseco pistons, Callies Rods, Stage III heads, TC76 Turbo, Alkycontrol, Lingenfelter 2 Step, Custom C4 Dana36 rear, 2950 lbs.
Thanks to Bob and Drew @ EPP, Ryan @ Lingenfelter, BeasTT Performance and JPH!
2006 Crew: Team Spiderman/Hulk Top Fuel Motorcycle
10 Time World Champions, World Record Holders for 1/4 E/T: 5.746 Seconds
Hey guys,
The 1967 Camaro that has been in my fathers barn for 21 years is being auctioned off due to Non-payment of the renter on November 15, 2008 @ 10 AM. Address is 760 S. Broadway, Butler, IN 46721. If anyone wants to, I can possibly show it for a couple of people this weekend, just pm if interested.
Luke, your car looks hilarious on the "pizza cutters".
I just about pulled a bassani on the way to work with them on... 60mph merging on 469 and the rear broke loose. I think i need some of that poop stain remover that Zach used after nearly transplanting an ls1 into a Subaru. I really wasnt expecting it to break loose like it did.
On a side note, i dont feel so bad about letting the smoke out of these tires occasionally. The wife and i tried to do a burnout to compete with Nasty Nate. It was close to a John Force, but i didnt go past the 1/8 mile mark.
Shawn, if you got nitrous, you could go, and still make it back in time to close (lol). What does Joe need to go for anyways? His car is going to be running.
__________________ 98 Formula WS6 M6, MS3, 2.5 5.3 heads, FAST 92mm intake, 92mm TB, ARH, ORY ect. 441 RWHP 95 Z28 M6, 383, D1SC, FMIC, pump gas with the stock PCM 614 RWHP
Thanks to all who gave vader the VOGUE pose in the shots....i was not mad i feel the pics kick ass...that damn black paint just absorbs into the night......