__________________ 1995 Firebird Formula A3- Th350, 4k Yank stall, Bolt ons, Suspension, 125 NX Kit and a 2860 Race Weight-
11.22@120
H/C/Nitrous LS1 in the works...hoping for 10.2x
Project 11sec gutted Formula here http://www.ls1tech.com/forums/lt1-lt...d-formula.html
Now for the heads cam ZO6. If all I put down was a measly 535rwhp on a heads, cam, intake, tune............I'd burn the mother fucker!!
The TA was sexy as hell. It seemed under powered for what it is though.
The stangs....They IMHO performed better for what was done to them than the GM stuff.
There is no way the camera car is only putting down low 400's and waxing high 400 Terminator. I smell something fishy. Then again......it's the streets. Tell the guy with the vett to get a real H/C/I tune and he will be a lot happier. wow 535. Weak. Sexy car though.
This may be first........me complimenting muffstains and bashing GM. LOL
Now for the heads cam ZO6. If all I put down was a measly 535rwhp on a heads, cam, intake, tune............I'd burn the mother fucker!!
The TA was sexy as hell. It seemed under powered for what it is though.
The stangs....They IMHO performed better for what was done to them than the GM stuff.
There is no way the camera car is only putting down low 400's and waxing high 400 Terminator. I smell something fishy. Then again......it's the streets. Tell the guy with the vett to get a real H/C/I tune and he will be a lot happier. wow 535. Weak. Sexy car though.
This may be first........me complimenting muffstains and bashing GM. LOL
Again.....GREAT VIDEO MAN!
The Z06 only picked up 1 rwhp and 9 rwtq with the heads, they are sending him another set.
The WS6 is a heavy mofo, iron block, 9", nawzzz kit, etc. It doesnt have a great set of heads either. It only makes 460 rwhp through the auto, but obviously runs better than that, it's been around 128 in the 1/4 n/a.
The Pullied Cobra only makes 434 rwhp, he doesnt care too much about making big power with that car right now, he has a turbo/331 93 LX that runs 5.90's in the 1/8 if he wants to go fast. I dont know why they were that close. I know the black Cobra was going WOT a bit, and doing flybys and stuff before their race, could have been a bit of heat soak? Stock cats are starting to clog? I dont know lol
Onyx Black '01 SS w/ Level II suspension, SLP lid, BoWhite ported TB, Super Sucker Ram Air, MSD wires, Hinson Supercars ported and Jet Coated stock manis, Random Tech Y-pipe, SLP DD, UMI STB and TA, SLP dash plaque, carpets and other BS stuff
'92 SSP Notch w/ lots of bolt-ons, awaiting suspension and the almighty LS1
Damn i miss seeing vids of that bad ass black z28!
__________________ 05' Silverado Comp cams custom grind cam, pacesetter lt's, cai, pully, cut-out, stock heads, 4.10 gears, built tranny 3600 stall, fully custom dyno tune by XXX motorsports GONE but will never be forgotten...by many!
02' z28.........
Come get it if u want some
Yeah...that Z06 is easily 100 rwhp down compared a properly set up H/C/I Z06. And the guy on the bike needs to get behind the bubble more...a lot more!! He is sitting up like on a Sunday ride. And did I see him shift with his clutch? Waste of time! Past 1st gear, the clutch is overrated.
__________________ 01' Arctic White SS
AS stage 2 5.3's, Comp 230/236 custom grind cam, Fast 90/90, Yella Terras, Moser 12 bolt w/4.11's, full BMR susp, Spec stage 3 clutch, LT's and Loudmouth!! and a whole bunch of other goodies!!
H&C C6 Z06, 408 WS6, 700+HP 99 GT, Vortech 02 GT, N20 LS1, 03 Cobras, GSXR, races! 
!
