05-27-2008, 06:32 PM
#1 Launching!
Join Date: Jul 2004
Location: VA
Posts: 223
My ls6 miata vs. a 300zxtt http://videos.streetfire.net/video/9...ata_163123.htm
I guess it is time to up the power. I have a ls6 383 with a tr224 114 cam. I wasn't running premium (had regular in it for the trip I took earlier that day.), should have since it was tuned for it. A great run with the 300zxtt. He was running 23psi of boost with 100 octane and aftermarket turbos and intercoolers with the supporting mods. The first run he didn't post. Put a car on him out the gate. This run was his best run. I let him get on it first, which allowed him to get into boost quicker. On the top side he did start to pull me. I let out due to road conditions ahead, but if it was flat and clear would of stayed in it. Strong car! Best race since I did this conversion......now time for a power adder!!!!!!!
__________________ Ls6 383 powered miata, t56, 3.27:1 T-bird rear, 2650lbs, and alot of other goodies.
05-27-2008, 08:30 PM
#2 TECH Fanatic
Join Date: Mar 2004
Location: DFW
Posts: 1,703
sweet ass car, i see twins in your future!
__________________
99 Z(370|KYTP TC78 kit|M6-TH400 with 3200PTC)
DD-2006 Silverado Duramax 3500 CC LB DRW
05-27-2008, 11:02 PM
#3 TECH Resident
2001 Pontiac Firebird My Garage
Join Date: Jul 2005
Location: Sparks,NV
Posts: 886
100 shot=GAME OVER, and thanks for playing.
__________________ 1999 Firehawk-A4, D1SC 7LBS, 5XXrwhp, 4XXRWTQ, twin 4.5in ic's,lvl5 FLT 4l60e, Yank 3600, comp cam, comp 918 springs, tfs pushrods, snow meth kit, ls6 intake, 60lb injectors, racetronix fuel pump with wiring harness, Tuned by Rick at Synergy Motorsports.
2001 T/A WS6-Patriot stg2heads;TFS III cam;fast 90/90;slp lts;slp maf;slp lid;slp lm1;ory;42lbs injectors;pro 5.0;asp pulley;445rwhp & 422ft lbs. Tuned by Rick at Synergy .
05-28-2008, 09:39 AM
#4 On The Tree
Join Date: Dec 2006
Location: Indy
Posts: 150
Any pics of your car that thing has got to be sick!
__________________ 99 TA M6 T-tops, MS3 111 lsa, 12 bolt, QA1's & susp on 18" BFG dr's
08 Mustang GT - DD
04 Cobra 626 rwhp 666 rwtq SOLD
91 LX Coupe 2900# 500+ rwhp Sold
05-28-2008, 04:37 PM
#5 Launching!
Join Date: Jul 2004
Location: VA
Posts: 223
www.ls1miata.net click on the pic 2 open the gallery.
__________________ Ls6 383 powered miata, t56, 3.27:1 T-bird rear, 2650lbs, and alot of other goodies.
05-30-2008, 11:23 AM
#6 Mortgage Banker Mod
Join Date: Nov 2001
Location: Columbus, GA
Posts: 1,808
Nice cars, have you hooked up with Robert on this forum from
www.speedsouth.com? He has an LS1 Miata...
__________________
John in Georgia
2002 EB Z06 , 4xx rwhp n/a, JLAudio, etc. 2003 Yukon , 5.3, 3.73's, HPP3, UPD, JL, Long Tubes, !cats, QTEC 1998 Blazer , 4.3, 3.73's, Eaton Posi, K&N FIPK, !cats, stereo stuff My 1999 Z28 10.8 + Street Vid |
ProCharged C5 Vid |
Yukon 120+mph Vid |
All My Videos FOR SALE - New Nitrous Kit
05-30-2008, 12:26 PM
#7 TECH Fanatic
Join Date: Apr 2006
Location: OKLAHOMA
Posts: 1,191
sounds like he was complaining about the hi roll
05-30-2008, 01:48 PM
#8 11 Second Club
Join Date: Jun 2005
Location: Norman, OK
Posts: 1,570
Do a 100 shot on it. Easiest and cheapest way to see a huge difference in your light little car. Sweet setup btw!
__________________
'98 TURBO T/A - Forged 348/T-70 ~ 616/634 / Full Int-A/C
05-30-2008, 03:23 PM
#9 TECH Veteran
Join Date: Aug 2006
Location: San Marcos/Plano, Texas
Posts: 4,863
dude i would be WAY too scared to ride/drive that thing! But still one badass sleeper
__________________
2001 Camaro SS #1752: ???rwhp ???tq- LS6 Intake l LS6 Heads l ORY l JetHot Sterling Coated Pacesetter LT Headers l Cut-Out l SLP Lid l Brembo Rotors
05-30-2008, 03:36 PM
#10 Launching!
Join Date: May 2006
Location: Blackwood, NJ
Posts: 228
I didn't know you could fit an LS in a miata. I would have thought the valve covers would smack into the strut towers before you could get everything tightened up. Can't watch the vid at work, but that's a nice little car you got there.
05-30-2008, 05:44 PM
#11 Launching!
Join Date: Jul 2004
Location: VA
Posts: 223
Never went ot hat site! Robert? Not sure? If he posts at miataforum.com in the engine conversion section then probably!
__________________ Ls6 383 powered miata, t56, 3.27:1 T-bird rear, 2650lbs, and alot of other goodies.
05-31-2008, 09:06 PM
#12 Mortgage Banker Mod
Join Date: Nov 2001
Location: Columbus, GA
Posts: 1,808
Quote:
Originally Posted by
turbotacoma Never went ot hat site! Robert? Not sure? If he posts at miataforum.com in the engine conversion section then probably!
He's on here too - they are a sponsor / vendor.
Here's his member page:
http://www.ls1tech.com/forums/member.php?u=104562
Robert Russom
SPEEDSOUTH, LLC
200 Bearden Rd.
Pelham(B'ham), Alabama 35124
T: 205.621.6969
F: 205.621.6967
E:
Robert@SPEEDSOUTH.com
__________________
John in Georgia
2002 EB Z06 , 4xx rwhp n/a, JLAudio, etc. 2003 Yukon , 5.3, 3.73's, HPP3, UPD, JL, Long Tubes, !cats, QTEC 1998 Blazer , 4.3, 3.73's, Eaton Posi, K&N FIPK, !cats, stereo stuff My 1999 Z28 10.8 + Street Vid |
ProCharged C5 Vid |
Yukon 120+mph Vid |
All My Videos FOR SALE - New Nitrous Kit
06-01-2008, 12:31 AM
#13 TECH Apprentice
Join Date: Jan 2008
Location: rockmart, for now...
Posts: 345
Quote:
Originally Posted by
allthrotle 100 shot=GAME OVER, and thanks for playing.
yea! throught at least a 150 shot and walk him like a dog!!
__________________
06-02-2008, 10:51 PM
#14 Launching!
Join Date: Jul 2004
Location: VA
Posts: 223
Putting a cam in it first.......then a small shot of gas my come into play!!!
__________________ Ls6 383 powered miata, t56, 3.27:1 T-bird rear, 2650lbs, and alot of other goodies.
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off