Best way to mount nozzle post maf??

Brian Coles · 07-01-2009, 06:20 PM

Anybody got pics of a post maf mounted nozzle? Where and how is the best way to do this? I know a plate will be better but untill then....

Nick@HSW · 07-01-2009, 09:38 PM

Best spot would be to drill and tap the back end of the maf housing. Or just use a nozzle retaining nut in the middle of the bellow.

Nick

Z-RATED94 · 07-01-2009, 09:56 PM

Quote:

Originally Posted by Nick@HSW

Best spot would be to drill and tap the back end of the maf housing. Or just use a nozzle retaining nut in the middle of the bellow.

Nick

For an LT1 would a air foil help the spray at the dead spot in front of the TB?

Brian Coles · 07-02-2009, 06:46 PM

So my best bet would to get a smooth bellow with a nozzel port. I saw one on ebay used. That will work till I get a plate.

robsquikz28 · 07-03-2009, 03:48 AM

Quote:

Originally Posted by Z-RATED94

For an LT1 would a air foil help the spray at the dead spot in front of the TB?

yes airfoil will help you out

HTh3r0 · 07-03-2009, 09:56 AM

when you mention plate are you talking about the spacer like part that goes inbetween the throttle body and maf?

dnkynrbk · 07-03-2009, 07:29 PM

Here is pics of my old tnt kit. drill and tap the maff I took mine apart then drilled it and tap TNT kit.