Msd window switch - Page 2

custm2500 · 10-12-2009, 06:32 PM

Cool glad to hear you got it figured out.

As a side note I tested mine by just not turning the nitrous on. It just runs fuel and flods the motor showing you it works.

TA1364 · 10-12-2009, 06:39 PM

I tested the fuel by just taping down the WOT switch and wrapping a plastic bag around the fuel line. Reved to 3200 and it worked perfect.

TA1364 · 10-12-2009, 06:41 PM

Quote:

Originally Posted by john563

Hurry up Sam so you could hook up a kit for me! Oh btw will be at that place 2morrow (tues) around 9:30ish-10

Lol, I could do another kit if you want. Its a pain in the ass tho.

john563 · 10-12-2009, 07:15 PM

Quote:

Originally Posted by TA1364

Lol, I could do another kit if you want. Its a pain in the ass tho.

So are you actually done? whats going on man? you still got all them wires hanging everywhere?

custm2500 · 10-12-2009, 07:21 PM

Quote:

Originally Posted by TA1364

Lol, I could do another kit if you want. Its a pain in the ass tho.

It seems you have had a few problems but nitrous is EXTREAMLY easy to install. A window switch only take 4-5 more wires and connections.

TA1364 · 10-12-2009, 09:04 PM

Quote:

Originally Posted by custm2500

It seems you have had a few problems but nitrous is EXTREAMLY easy to install. A window switch only take 4-5 more wires and connections.

The wiring isnt hard now that I know what works and where stuff goes. Worst part is changing plugs.

Quote:

Originally Posted by john563

So are you actually done? whats going on man? you still got all them wires hanging everywhere?

Well I got to wire the heater but I dont no when I'll get to it. Hopefully it goes smooth.

Z284U2TRY · 10-13-2009, 04:10 PM

Quote:

Originally Posted by custm2500

It seems you have had a few problems but nitrous is EXTREAMLY easy to install. A window switch only take 4-5 more wires and connections.

A Basic kit yes its easy but add a direct port into the mix with all supporting acces. You now have your work cut out for you.