Ladies and Gents. I finally took some pictures of my nitrogen push setup.

Parts list:

114ci/4500 psi carbon fiber paintball tank with 1000 psi reg.
12 inch -4 nitrous line
NX 45degree valve with push port
High pressure check valve


Setup works nicely, instant bottle pressure, and it only cost me about 200 dollars in parts.

 

Looks great. Any testing yet?

 

Looks like you did a good job. When are you going to test it out?

 

yea works perfect!

 

200 rwhp shot works fine. I really didn't want to spend the money on a NANO, started to hate bottle heaters, and finally just old school hot rodded my way through a parts pile of things laying around.

 

So, what kind of track improvements have you seen with it?

 

havent taken it to the track lol. just street

 

That's a pretty nice setup. I have a 100ci tank laying around with a adjustable reg. Might be time to put it to use.

 

Wow, very nice setup. How many 10lb. bottle do you think you could push with that?

Larry

 

1 bottler per tank. works perfectly

 

That is pretty freaking cool man. The port on the side of the bottle valve goes directly into the bottle and the nitrogen forces all the nitrous out under pressure? How much does it cost to fill that nitrogen tank?

 

5 bucks to fill..its just a paintball tank

 

If you have a host Nitrogen tank, can you fill the small bottles as you would Nitrous?

 

nope..needs to be compressed. nitrogen isnt a cryogenic gas like nitrous is.

 

Did you adjust your jetting at all to curb the lean out on top?

 

If you were to keep the bottle pressure regulated down to 900-950 range, is there still a need to rejet the system?

 

It depends on the size of shot you are using, and the pressure drop you see on the big end without the push setup.

 

It would be 100-125 shot at most

 

Moar info, I just finished my own Standalone that cost me 200 bucks, it would be nice to do a Nitrogen set up for the same cost.

 

I wonder if this would work on a 300 shot??