Lots of parts! Must Look.

Ryan K · 10-22-2008, 11:48 PM

1. Magnafuel 4303 Fuel pump. This is a 2000hp capable fuel pump! Very few miles. This cost $500 new. $380.00 Includes -12AN inlet and -8AN outlet fittings.($30 in fittings!)

Once-piece design is more compact and light weight.
Ideal for street muscle cars
Quiet operation
Self priming
Continious duty
No pump shaft seals, no leaks
Pump body CNC machined aircraft aluminum
High-torque custom motor with very low current draw. Never requires stepdown
More efficient than other motors
Double support bearings
Rebuildable to as-new condition
Compact design fits in smaller spaces
Smaller than competive pumps, lower current draw, more powerful
Hard anodized, long lasting finish
Mounting bracket included
Vertical or horizontal mount
Polymer wear plates for smooth, quieter operation

2. Summit 10 Micron -8AN fuel filter Billet high pressure part number SUM-230116. New $68. $45

3. Mallory 4305M Adjustable Fuel Pressure regulator, Vacuum/Boost referenced, EFI pressures $100 new.Sold

4. Proffesional Products Adjustable Fuel Pressure Regulator, Vacuum/Boost referenced, EFI spring includes -8AN fittings and Return port Adapter $45

5. Crane Roller Lifters, LS1 Very low miles! $125.00 Part Number CRN144530-16

6. Dyno Tune Remote bottle opener $100 Fits all bottles except NOS

http://www.dynotunenitrous.com/store...p?idproduct=16

7. Dyno Tune Nitrous Bottle Heater SOLD Automatic includes pressure gage!

8. Caspers Volt Blaster Raises Alternator voltage 2 volts when you go WOT. $55

Caspers Electronics V-Plus gives you hotter spark and increased fuel flow when you need it most.
Your alternator is designed to put out a specific voltage, generally 13.8 V. The only problem is that when there is a greater demand on the electrical system, such as a wide-open throttle blast, the alternator falls a little short. The V-Plus boosters are designed to overcome voltage taper at wide-open throttle by stepping up the alternator voltage by 2.2 V at 70 percent throttle. This provides more power to your fuel pump and ignition system. These V-Plus voltage boosters plug in, with no wires to cut or tap into, and include all hardware.

9. More to Come!

I always take Money Orders/Certified Checks or Paypal : rkarasek@gmail.com

PONYEATER · 10-23-2008, 09:40 AM

so you parting out the rest of the car? I have always wanted to tub 4th gen.

Ryan K · 10-23-2008, 09:46 AM

No, just selling parts to buy new/different parts... Like a spool.

Ryan K · 10-23-2008, 11:02 PM

Mallory FPR Sold

Ryan K · 10-24-2008, 03:59 PM

Lowered all prices! Lets get this stuff into a new home.

Ryan K · 10-24-2008, 04:22 PM

9. 17X9.5" and 17 x 11" ZR1 wheels. Silver. The fronts are GM castings, the Rears are AFS replicas. These are much better than the cheapo Ebay wheel wich are made over seas. I had a set that was significantly heavier than these. I have had these for a while but they are in really good shape. The rears are the Grand sport offset Perfect for 4th gen Camaro's with the deep dish centers. $500 I paid that for the rears alone! Comes with screw in valve stems, lugnuts and matching silver covers.

10. Billet Valve cover spacers. These raise the VCs about 1" and use the factory VC o-rings. You will need different valve cover bolts, new, never used $75.00

11. Front radial skinnys. fits on 15X3.5" wheels no probem. Very low miles as in 95% tread left. $75 for both

12. LS1 valley cover $50

13. 4th gen Brake booster $25

14. Fidanza LS1 Aluminum Flywheel (needs resurfaced) $100

15. LS1 Water pump $50

16. Factory Rear lower control arms $35

17. M&H Racemaster Drag radials 325/45/17's Lots of Good tread left. These fit on the 17X11"s and my camaro with out any rubbing. They are close to 28" tall and Hook like there is no tommorow. I just don't need them any more. New these are $200+ per tire. $200 for the pair

18. Camaro Front Grey Leather Seats. The drivers side seat has pass throughs cut/sewed in for a 5 point harness. The leather is aftermarket, VERY NICE! $250

I'll try to get pictures up ASAP.
More coming!