 | 
11-01-2008, 12:59 AM
|
#1 | | Staging Lane
Join Date: Aug 2008 Location: flint,mi
Posts: 77
|  how do you remove those triangle pisces???
__________________
67 GARRET STS TURBO,31X12X3 FMIC, 42LBS,RACETRONIX PLUG & PLAY,AND STILL ADDING | 
|  | |
11-01-2008, 10:54 AM
|
#2 | | Launching!
Join Date: Aug 2005 Location: San Diego
Posts: 279
|
is this for paint? They are just held on with 3m double sided tape. Use a flat, thin scraper tool or similar and carefully slide it under the triangle piece without scratching the paint and when you get to the end, carefully pry the piece off as it should be easy at this point and only have a little bit holding it. Use an adhesive remover liquid to help if necessary.
__________________
1994 Camaro Z28 A4 (290rwhp, 320tq) - Dark Green-Grey Metallic - 357ci LT1 - Mild Crane Cam, Ported Heads, JBA Shorties, 54mm TB, CAI, 3" TSP Rumbler Catback, Tranny Cooler. Built by JBA Racing.
1970 Camaro Z28 A2 Clone Project (0rwhp) -Primer (Still Working)
1994 A4 Camaro 3.4L V6 - NBM - SOLD | |
| | |
11-02-2008, 01:04 AM
|
#3 | | TECH Regular
Join Date: Dec 2005 Location: Bay Area, CA
Posts: 445
|
and remember, the sail panel extends under the triangular trim piece, so when you put a screwdriver, etc. under the trim, make sure your are prying between the trim and the sail panel. I accidentally got under the sail panel when removing my first one and had to do a little bondo fix because I cracked the sail panel. The best thing to do is heat it up nice and hot with a blow dryer and just lift from the bottom of the triangular piece and it should peel off with enough force.
__________________ 2002 Camaro Z28 - 4L60E - 3.23 - T-Tops - Sunoco Hood - 10 Spoke SS Rims & Spoiler MagnaFlow w/ Cutout, FTRA, TSP Lid, Smooth Bellows, Ported TB, Summit UD Pulley, SLP 160* Stat, B&M Tranny Cooler, HPTuners Koni SA, GC Coilovers, Eibach Springs, BMR Adj. TA & LCARB, ST 35/21 Sway Bars, J&M Rod/Rod LCA & PHB, UMI SFC, SLP STB, Hawk HPS
Alpine CDA-9884, Kicker ZX480.1, ZX242.4, Alpine 10" Type-R Subwoofer, CDT CL-61CV Components, Stealth Box
| 
| | |
11-06-2008, 09:51 PM
|
#4 | | Teching In
Join Date: Jun 2008 Location: 60964,IL
Posts: 22
|
i tried taking those off and now i have 2 new ready to go back on HAHHA | |
| | |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off | | |
| |  |
