My dad is buying a 4th gen Camaro from me that needs the left rear quarter panel replaced. I've found prices as low as $495 (not including shipping) on a GM rear quarter. Are there any aftermarket sources out there that make a good part for less $$?
__________________ 1994 B4C Camaro M6 hardtop, Hennessey RS330, 1 of 1 made, Bright Teal Metallic. 383 forged LT1 stroker, C5 ZO6 brakes, coilovers, lots of goodies! FOR SALE $6000 OBO!!
rear 1/4 pannel? doesnt that have to be WELDED on?
__________________ 1998 Camaro Z28 and 2004 Yamaha R1... Both FAR from stock
Everyone wants the big power but noone wants to do the big work Car currently under the knife, TRT 67 Turbo, Fast 90/90, HPE Megadeath cam, Hooker 1 7/8 Headers, TSP ORY, 2 bar SD tune, 2002 VCM swap
I bought the entire rear section of a scrap'd early 4th gen firebird, brought it to my body man, and he drilled out the welds on my and the donor rears. Then lined up the new rear quarter, holding it with vice grips or what not, and re tack welded in the original position. Now after painting etc, it looks like factory.
Im not sure what a replacement fender consists of, but I wouldnt go with anything other than an entire replacement from welds to welds.
Plus that entire rear cost me less than what youve just listed, lol.
__________________ 1999 WS6 A4 T/A #430 of 5007 by ASC
2005 GMC Sierra 2500HD 6.0L
I bought the entire rear section of a scrap'd early 4th gen firebird, brought it to my body man, and he drilled out the welds on my and the donor rears. Then lined up the new rear quarter, holding it with vice grips or what not, and re tack welded in the original position. Now after painting etc, it looks like factory.
Im not sure what a replacement fender consists of, but I wouldnt go with anything other than an entire replacement from welds to welds.
Plus that entire rear cost me less than what youve just listed, lol.
Yeah, knowing how cheap my dad is I imagine he will probably be scouring the salvage yards for a quarterpanel instead of buyin a new GM panel. He will probably spend a couple hundred dollars in gas looking for one!
__________________ 1994 B4C Camaro M6 hardtop, Hennessey RS330, 1 of 1 made, Bright Teal Metallic. 383 forged LT1 stroker, C5 ZO6 brakes, coilovers, lots of goodies! FOR SALE $6000 OBO!!
Yeah, knowing how cheap my dad is I imagine he will probably be scouring the salvage yards for a quarterpanel instead of buyin a new GM panel. He will probably spend a couple hundred dollars in gas looking for one!
I first used the phone, it was cheaper on gas, lol.
__________________ 1999 WS6 A4 T/A #430 of 5007 by ASC
2005 GMC Sierra 2500HD 6.0L
I bought 1/4 of a Camaro and put it in my Jeep cheaper than a new panel and you get extra metal you might need
My friend was laughing his ass off when I brought it to him
4th Gen Camaro Quarter Panel sources? 
cheaper than a new panel and you get extra metal you might need
