Dynamometer Results & Comparisons Dyno Records | Dyno Discussion | Dyno Wars

dyno numbers when your ls1 was stock

Thread Tools
 
Search this Thread
 
Old 08-24-2004, 10:44 AM
  #1  
Teching In
Thread Starter
 
mudslingerdojo's Avatar
 
Join Date: Aug 2004
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default dyno numbers when your ls1 was stock

a guy from work is a damn idiot. big on ford. ford only. and all fords dominat all. especially the fbody.

he doesnt believe two things. that stock ls1's, 98-02 camaro and firebirds. dyno more then 300+rwhp and doesnt believe that one can break 12s stock.

i know for a fact one can because a friends 00 ss ran a 12.9 bone stock.

i would just like numbers of your cars when dyno'd stock. so i can show him how he is wrong. thanks!
Old 08-24-2004, 10:47 AM
  #2  
12 Second Club
 
jermstyle's Avatar
 
Join Date: Sep 2003
Location: Houston
Posts: 634
Likes: 0
Received 1 Like on 1 Post
Default

My M6 put down 309/324 bone stock. This is with the stocko air box and everything else on a dyno that the operator said gave low numbers.

Puts down 334/343 with the mods in sig on the same dyno, all numbers are corrected.

Last edited by jermstyle; 08-24-2004 at 11:13 AM.
Old 08-24-2004, 11:10 AM
  #3  
Launching!
 
PHANTA-Z's Avatar
 
Join Date: Jan 2002
Location: Charlotte, NC
Posts: 262
Likes: 0
Received 0 Likes on 0 Posts

Default

Mine was good for 308/328 stock. Ive seen 3 fbods dyno over 320 rwhp STOCK. One a '02 WS6 (324), one a 00 SS (322), and one a 99 TA (321). Yeah if your not over the 300 mark stock, something a bit wrong. Ive never seen a proper running LS1 make less than 300 (ok a sluggish A4 maybe mid-high 290s).
Old 08-24-2004, 11:15 AM
  #4  
TECH Apprentice
 
Hannibal's Avatar
 
Join Date: Dec 2001
Location: Waldorf, Maryland
Posts: 369
Likes: 0
Received 0 Likes on 0 Posts

Default

324/335 BONE stock (m6). Went 12.97 at 109 mph.
Old 08-24-2004, 11:41 AM
  #5  
TECH Enthusiast
iTrader: (11)
 
enginjoe's Avatar
 
Join Date: Feb 2004
Location: Tucson, AZ
Posts: 679
Received 1 Like on 1 Post

Default

See sig.
Old 08-24-2004, 11:55 AM
  #6  
TECH Enthusiast
iTrader: (3)
 
DD966's Avatar
 
Join Date: Apr 2003
Location: Connecticut
Posts: 701
Likes: 0
Received 1 Like on 1 Post
Default

311/325 stock here. Boy, that didn't last long. Neither will my current numbers, hehehe.
Old 08-24-2004, 12:05 PM
  #7  
Launching!
iTrader: (2)
 
MikeMs01TA's Avatar
 
Join Date: Feb 2003
Location: Kentucky
Posts: 223
Likes: 0
Received 2 Likes on 2 Posts

Default

302/323 stock everything (except the gas ) '01 M6 TransAm
Old 08-24-2004, 12:06 PM
  #8  
TECH Fanatic
 
WS6snake-eater's Avatar
 
Join Date: Mar 2003
Location: La Porte, TX
Posts: 1,839
Likes: 0
Received 0 Likes on 0 Posts

Default

2001 A4 Ws6
333/337 With just a lid filter and cutout.
Old 08-24-2004, 03:30 PM
  #9  
12 Second Club
iTrader: (1)
 
Chris81's Avatar
 
Join Date: Jul 2002
Location: Midland, Tx
Posts: 621
Likes: 0
Received 0 Likes on 0 Posts

Default

315/332 with free mods and a lid..

I Ran a 13.29 on DR's at over 3000 DA at the time.

A friend of mine with an 02 M6 WS6 made 344/356 with just a lid, cutout and TB..
Old 08-24-2004, 04:42 PM
  #10  
TECH Fanatic
iTrader: (3)
 
Ryan02SS's Avatar
 
Join Date: May 2003
Location: Lake Anna, VA/ Fairmont, WV
Posts: 1,795
Likes: 0
Received 0 Likes on 0 Posts
Default

315rwhp @ 326rwtq here with all of 1500 miles on the engine. The LS1 takes around 10K miles to fully break in also. So your numbers should theoretically improve dynoing at low miles and then after 10K.
Old 08-24-2004, 05:53 PM
  #11  
TECH Fanatic
iTrader: (12)
 
B18B1LS1's Avatar
 
Join Date: Nov 2001
Location: Lawrenceville, Ga
Posts: 1,711
Likes: 0
Received 6 Likes on 5 Posts

Default

My 98 A4 made 318/330 with a K&N and cut-out. Ran a 13.1 @ 105ish with a 3600# raceweight!
Old 08-25-2004, 06:24 AM
  #12  
12 Second Club
iTrader: (2)
 
Checkmate's Avatar
 
Join Date: Feb 2004
Location: Front Royal, VA
Posts: 1,011
Likes: 0
Received 0 Likes on 0 Posts

Default

311/332 bone stock 13,2xx miles.
Old 08-25-2004, 07:10 AM
  #13  
11 Second Club
iTrader: (29)
 
ccajun4real's Avatar
 
Join Date: Jan 2004
Location: Tampa FL
Posts: 482
Likes: 0
Received 1 Like on 1 Post

Default

Originally Posted by mudslingerdojo
a guy from work is a damn idiot. big on ford. ford only. and all fords dominat all. especially the fbody.

he doesnt believe two things. that stock ls1's, 98-02 camaro and firebirds. dyno more then 300+rwhp and doesnt believe that one can break 12s stock.

i know for a fact one can because a friends 00 ss ran a 12.9 bone stock.

i would just like numbers of your cars when dyno'd stock. so i can show him how he is wrong. thanks!
Stock dyno on 2000 A4 Corvette was 301 HP and 302 TQ through a Yank 2800 and 3:73 rear. Ran 12.88 at 111MPH stock. Of course you loose more HP and TQ with and A4. Had the car been M6 it would have been about 10/10 higher.
Old 08-25-2004, 09:43 AM
  #14  
Moderator
iTrader: (13)
 
thechef's Avatar
 
Join Date: May 2002
Location: milford,CT
Posts: 4,718
Likes: 0
Received 1 Like on 1 Post

Default

328rwhp 340 rwtq at 15k miles
Old 08-25-2004, 09:55 AM
  #15  
On The Tree
 
AZ28DRIVER1's Avatar
 
Join Date: Jan 2004
Posts: 120
Likes: 0
Received 0 Likes on 0 Posts
Default

313hp /338 tq all stock 01 Z28 with M6
Old 08-25-2004, 08:45 PM
  #16  
Staging Lane
iTrader: (2)
 
00BadassTA's Avatar
 
Join Date: Aug 2004
Location: St.Charles, Mo
Posts: 76
Likes: 0
Received 0 Likes on 0 Posts

Default

312hp/314tq and this was stock all the way to the paper air filter. 00 WS6 M6
Old 08-25-2004, 11:39 PM
  #17  
I can shift faster than you.
iTrader: (21)
 
Jason99T/A's Avatar
 
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 5,133
Likes: 0
Received 0 Likes on 0 Posts

Default

When my car was BONE stock back in 1999 with 5k miles on the car, it dynoed 289rwhp/305rwtq.
Old 08-26-2004, 12:28 AM
  #18  
TECH Addict
iTrader: (5)
 
LSs1Power's Avatar
 
Join Date: Mar 2002
Location: VA
Posts: 2,320
Likes: 0
Received 0 Likes on 0 Posts

Default

In Sig.
Old 08-26-2004, 07:14 AM
  #19  
jrp
SN95 Director
iTrader: (16)
 
jrp's Avatar
 
Join Date: Jul 2003
Location: Valencia, Ca
Posts: 10,755
Likes: 0
Received 4 Likes on 4 Posts

Default

if he was a real ford fan im sure he has heard of the 12.8 @ 109-110 Evan Smith did in a bone stock Fbody a few years back. i mean after all, it was in Muscle Mustangs & Fast Fords
Old 08-26-2004, 09:31 AM
  #20  
TECH Junkie
iTrader: (30)
 
12secSS's Avatar
 
Join Date: Nov 2001
Posts: 3,690
Likes: 0
Received 1 Like on 1 Post

Default

2001 Camaro SS A4 10,000 miles and showroom stock, no mods at all! 312rwhp and 319rwtq
1998 Camaro Z28 A4, 3.23 84,000 miles and factory stock 289rwhp and 306rwtq


Quick Reply: dyno numbers when your ls1 was stock



All times are GMT -5. The time now is 02:01 AM.