Speed inc 8 gallon fuel tank- $350

Aeromotive A1000 Fuel Pump- $260

Aeromotive p/n 12304 Fuel filter- $80

Speed Inc. Billet fuel rails- $150

SVO 30lb injectors(used)- $200

Weld Magnum 15x3.5" Front wheels- $700

MAF Translator(used)- $130

LS1 Edit MY2000- $400

Performaire O2 Weather Station- $700

Hooker Long Tubes coated- Pending Payment

Schubeck lifters- $300

JPR Stage 2 HVLD heads(valves are new, springs are new but have surface rust, I think the ti retainers are new also. Don't have a clue what they flow but I'd imagine they're one of Joe's good pair) $800

LS6 oil pump- stock $70

SLP Double Roller timing set- $150

ASP UD Pulley Not SFI version- $140 (used)

Comp Cams hardened pushrods 7.35- 90

JPR Electric water pump- as far as I know this may be the only one, if not there isn't that many out there- tubular version- CSI remote pump will need some AN fittings and braided line to complete the installation- $500

4L60e Trans with truck pan- $400

Yank Thruster Pro 4500- $650

ported Stock Throttle Body- $120

Prices do not include shipping and all parts are new except where noted

Accept paypal, check and money orders. checks will have to clear before shipment

This is the first few parts I still need to go through the garage to remember what I actually got laying around

One other thing, I extremely busy at work so if you need any of these parts quickly I can't make any promises, more than likely it would have to wait until the weekends for me to be able to ship the parts out

LAter

 

I'll take the ASP Pulley. Belts included? PM sent

 

I'll take these....just PM me the info for paypal.....thanks joey

 

Here's a link to the pictures I took of some of the parts

http://community.webshots.com/user/bob2of3

later

 

Dibs on the FTRA - PM sent...

 

PM me a price for the weld front runners shipped to 38128 thanks.

 

I'll take the heads,they were my orig heads from my TA
I offered u in a PM,if u wanna sell them just PM me

Joel

 

Bob, I sent you the funds so I look for the package sometime next week.

PS how much for the f body oil pan and belt tensioner that mount to the water pump ?

 

where did you have that fuel cell mounted?and what comes with it?

 

Bob, sent you a pm, thanks

 

What size TB is it?

 

Update: I received all the pm's and email going through who's in line, will start repling shortly

LAter

 

where was the fuel cell mounted?im very interested got pics of it mounted?

 

Its a home ported stock unit

LAter

 

will the fuel rails fit an LS2 manifold?

 

Not a clue if they fit the LS2 intake. Give Speed Inc a call they should know the answer

LAter

 

TTT- Parts sent out

 

PM sent on injectors..

 

interested in fuel rails possibly. i think that i cracked one of mine.
do they have everything needed to install to factory fuel system so i can just install one night and go on my way?

Thanks
Louie

 

PM sent on the headers...