NEW hardened pushrods, SLP lid, LS2 cam, K&N filter, misc stock parts
Thread Starter
TECH Fanatic
iTrader: (35)
Joined: Sep 2004
Posts: 1,660
Likes: 0
From: Maryland/Illinois
NEW hardened pushrods, SLP lid, LS2 cam, K&N filter, misc stock parts New, never used 7.4" Futral hardened pushrods. Came with my cam kit, but I needed longer ones. $90
SLP intake lid, has 2 holes drilled for dry nitrous kit but you can get a couple plastic plugs to put in them, otherwise lid is in great shape $70
Stock 2005 LS2 cam, 4k miles on it (same specs as an 01 Z06 cam) $65
K&N air filter for F body cars, about 3000 miles on it. $35
Stock 2000 hurst shifter $75
2 stock LS1/LS6 flywheel, good condition, will need surfaced $50 each
Stock torque arm, has been repaired at rear diff bolt hole $55
Stock 26 lb injectors, work fine, ~40k miles $50
Stock lower control arms $50
SLP intake lid, has 2 holes drilled for dry nitrous kit but you can get a couple plastic plugs to put in them, otherwise lid is in great shape $70
Stock 2005 LS2 cam, 4k miles on it (same specs as an 01 Z06 cam) $65
K&N air filter for F body cars, about 3000 miles on it. $35
Stock 2000 hurst shifter $75
2 stock LS1/LS6 flywheel, good condition, will need surfaced $50 each
Stock torque arm, has been repaired at rear diff bolt hole $55
Stock 26 lb injectors, work fine, ~40k miles $50
Stock lower control arms $50
